Job Title: 
Janitor 
Location: 
Chilton, Ferryhill, County Durham
<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;text-align: center;">
<hr></div>
The Role 
Jackson Hogg is recruiting on behalf of our client for a reliable and hardworking Janitor to support the day-to-day upkeep of a busy site in Chilton, Ferryhill. Reporting to site management, this role plays an important part in maintaining a clean, safe, and well-presented environment for employees and visitors.

<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;text-align: center;">
<hr></div>
Key Responsibilities

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Daily cleaning of common areas including offices, restrooms, corridors, and break rooms
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Sweeping, mopping, and vacuuming floors
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Dusting and wiping down surfaces such as windowsills, desks, and countertops
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Emptying general waste and recycling bins, ensuring correct disposal practices
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Basic grounds maintenance, including outdoor bins and recycling areas
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carrying out minor repairs and simple handyman tasks within capability (e.g. changing light bulbs, fixing small leaks, minor paint touch-ups)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Assisting with deep cleaning tasks when required (e.g. carpet cleaning, floor waxing, window washing)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Preparing rooms for meetings and supporting cleaning before or after site events
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Supporting basic building maintenance internally and externally
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Following all site health, safety, and environmental procedures
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Reporting any damage, defects, or safety hazards identified
</ul>

<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;text-align: center;">
<hr></div>
Candidate Requirements

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Dependable, practical, and detail-focused approach
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Basic understanding of cleaning products and equipment (preferred but not essential)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Basic understanding of minor repair or handyman tasks, or willingness to learn
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Physically able to carry out cleaning duties, including lifting, bending, and standing
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong time management skills and ability to work independently
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Positive attitude toward maintaining high standards of cleanliness and hygiene
</ul>

<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;text-align: center;">
<hr></div>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">16–20 hours per week, Monday to Friday
	<li style="margin: 0.0cm 0.0cm 8.0pt;">4-hour shifts (flexible schedule by agreement)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">£12.21 per hour
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Weekly pay
	<li style="margin: 0.0cm 0.0cm 8.0pt;">23 days holiday + 8 bank holidays per year (Jan–Dec holiday year)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Safe working environment with clear health & safety procedures
</ul>

Part-Time Janitor

Job Title: 
FLT Driver

Location: 
Ferryhill

Shift: 
Day shift

Pay Rate:

<ul>
	<li>
	£12.71 per hour (day shift)
	
</ul>

<hr>
<h3>The Role</h3>

Jackson Hogg is recruiting on behalf of our client for an experienced FLT Driver to join a manufacturing and warehouse operation in Ferryhill. This is a day-shift role supporting production and assembly teams through the safe movement, storage, and handling of materials.

The successful candidate will be comfortable working independently within a small team and will play a key role in ensuring materials are available to support day-to-day operations.

<hr>
<h3>Key Responsibilities</h3>

<ul>
	<li>
	Operating forklifts safely within a warehouse and manufacturing environment
	
	<li>
	Moving, storing, and supplying materials to production and assembly areas
	
	<li>
	Loading and unloading goods from deliveries and dispatches
	
	<li>
	Ensuring materials are stored correctly and safely
	
	<li>
	Supporting general warehouse and production activities as required
	
	<li>
	Adhering strictly to all health & safety procedures
	
</ul>

<hr>
<h3>Candidate Requirements</h3>

<ul>
	<li>
	Previous experience driving forklifts in a warehouse or manufacturing environment
	
	<li>
	Valid FLT licence
	
	<li>
	Good organisational skills and attention to detail
	
	<li>
	Ability to work independently within a small team
	
	<li>
	Reliable, safety-focused approach to work
	
</ul>

<hr>
<h3>Desirable (but not essential)</h3>

<ul>
	<li>
	Experience using inventory or stock control systems
	
</ul>

<hr>
<h3>What’s on Offer</h3>

<ul>
	<li>
	Day shift working pattern
	
	<li>
	Competitive rate of £12.71 per hour
	
	<li>
	Stable, ongoing role in a manufacturing environment
	
	<li>
	Supportive team and structured working environment
	
</ul>

FLT Driver

Job Title: 
Paint Plant General Operator

Location: 
Ferryhill

Shifts: 
2-shift rotation

<ul>
	<li>
	Initial training on day shift
	
	<li>
	Progression onto a rotating 2-shift pattern
	
</ul>

Pay Rate:

<ul>
	<li>
	Advertised rate: £14.65 per hour (2-shift rate)
	
	<li>
	Initial day shift rate during training: £12.21 per hour
	
</ul>

<hr>
<h3>The Role</h3>

Jackson Hogg is recruiting on behalf of our client for a Paint Plant General Operator to join a busy manufacturing environment in Ferryhill. This role supports the day-to-day operation of the paint plant, covering both powder coating and wet paint processes, from job preparation through to packing finished components.

You will work as part of a small team; however, the ability to work independently and manage multiple jobs without supervision is essential.

<hr>
<h3>Key Responsibilities</h3>

<ul>
	<li>
	Working on a powder coat and/or wet paint plant
	
	<li>
	Selecting the correct paint from stock for each new job
	
	<li>
	Jigging components ready for painting
	
	<li>
	Masking parts in line with drawing and job specifications
	
	<li>
	Packing finished parts to required standards
	
	<li>
	Carrying out visual quality checks
	
	<li>
	General housekeeping duties within the paint plant area
	
</ul>

<hr>
<h3>Candidate Requirements</h3>

<ul>
	<li>
	Ideally at least 1 year’s experience working on a powder coat or wet paint plant
	
	<li>
	Able to work accurately and maintain high quality standards
	
	<li>
	Comfortable working unsupervised within a small team environment
	
	<li>
	Reliable, safety-conscious, and well organised
	
</ul>

<hr>
<h3>Desirable (but not essential)</h3>

<ul>
	<li>
	Experience reading and understanding engineering drawings
	
</ul>

<hr>
<h3>What’s on Offer</h3>

<ul>
	<li>
	Competitive £14.65 per hour 2-shift rate
	
	<li>
	Initial training period on day shift
	
	<li>
	Stable, ongoing role within a manufacturing environment
	
	<li>
	Varied work across different jobs and components
	
</ul>

Paint Operative

Job Title: 
Metal Dresser

Location: 
Ferryhill

Shifts: 
2-shift rotation

<ul>
	<li>
	Initial induction on day shift (Day 1)
	
	<li>
	Then moving straight onto a rotating 2-shift pattern
	
</ul>

Pay Rate:

<ul>
	<li>
	Advertised rate: £14.65 per hour (2-shift rate)
	
	<li>
	Initial day shift rate: £12.21 per hour
	
</ul>

<hr>
<h3>The Role</h3>

Jackson Hogg is recruiting on behalf of our client for an experienced Metal Dresser to join a busy fabrication and manufacturing environment in Ferryhill. This is a hands-on role focused on dressing and finishing welded components to a high standard, primarily in preparation for painting.

The successful candidate will work as part of a small team but must be comfortable working independently across a range of components and jobs.

<hr>
<h3>Key Responsibilities</h3>

<ul>
	<li>
	Dressing and finishing welded components to a high standard
	
	<li>
	Using a range of hand-held tools, including:

	<ul>
		<li>
		Electric grinders
		
		<li>
		Pneumatic grinders
		
		<li>
		Pad sanding tools
		
	</ul>
	
	<li>
	Preparing components of various shapes and sizes for painting
	
	<li>
	Producing high-quality dressed finishes where parts are left unpainted
	
	<li>
	Working accurately and efficiently to job requirements and deadlines
	
</ul>

<hr>
<h3>Candidate Requirements</h3>

<ul>
	<li>
	Minimum 1 year’s experience in a metal dressing / finishing environment
	
	<li>
	Confident using hand-held grinding and sanding tools
	
	<li>
	Able to work to a consistently high finish and quality standard
	
	<li>
	Comfortable working unsupervised within a small team environment
	
	<li>
	Reliable, safety-focused, and quality driven
	
</ul>

<hr>
<h3>Desirable (but not essential)</h3>

<ul>
	<li>
	Experience reading and understanding engineering drawings
	
</ul>

<hr>
<h3>What’s on Offer</h3>

<ul>
	<li>
	Competitive £14.65 per hour 2-shift rate
	
	<li>
	Structured induction with clear transition onto shifts
	
	<li>
	Stable, ongoing work in a manufacturing environment
	
	<li>
	Opportunity to work on varied components and jobs
	
</ul>

Metal Dresser

Fitter 
Jackson Hogg is supporting our valued manufacturing client in their search for an experienced and reliable Sign Fitter to join the installation team based in Leeds. This is a hands-on role involving the installation of a wide range of signage solutions at sites across the UK. 
 
The position will involve regular travel and overnight stays, so flexibility and a willingness to work away from home are essential. 
 
Key Responsibilities
<ul>
	<li>Install a variety of internal and external signage at customer sites
	<li>Safely use plant, access equipment, and installation tools
	<li>Ensure all installations are completed to a high standard with strong attention to detail.
	<li>Follow health and safety procedures at all times
	<li>Represent the company professionally while on customer sites.
	<li>Work both independently and as part of a team to meet project deadlines.
</ul>
Skills & Experience

<ul>
	<li>Previous signage installation experience is highly desirable.
	<li>A full, clean UK driving licence is essential (Please note you will not be considered if you do not have a UK driving licence).
	<li>Training in the safe use of plant and access equipment
	<li>Ideally, hold valid PASMA, IPAF, and CSCS cards
	<li>Good knowledge of health and safety practices
	<li>Flexible approach to working hours and travel
	<li>Electrical experience would be an advantage
</ul>
What you can expect

<ul>
	<li>Varied work on projects across the UK
	<li>Opportunity to work with an experienced and supportive installation team
	<li>Long-term opportunity within a growing and professional business
</ul>
If you are an experienced Sign Fitter who enjoys varied work and travelling nationwide, please apply to learn more about the role. 
 
Location: Leeds (with UK-wide travel) 
Contract: Full-Time

Fitter

Procurement & Contracts Manager 
West Yorkshire 
Temporary / Permanent  
Salary Dependant on Experience £

If you’re a commercially driven procurement professional who enjoys getting under the skin of a supply chain and delivering tangible cost savings, this role is all about impact.

This is a client-facing Procurement & Contracts Manager position within an established manufacturing environment, focused on analysing third-party spend, developing smart contracting strategies, and reducing operational expenditure. You’ll act as a trusted advisor bridging site teams, group procurement, and legal  while delivering data-led, credible savings plans.

The Role & Responsibilities

<ul>
	<li>
	Analyse and map end-to-end supply chains to identify cost reduction and value improvement opportunities.
	
	<li>
	Review existing supplier arrangements, scopes, and commercial  contracts and terms, developing data-driven savings strategies aligned to client objectives.
	
	<li>
	Lead high-value, high-risk contract development including commercial negotiation and implementation.
	
	<li>
	Act as the key interface between site-based stakeholders, group procurement and legal teams.
	
	<li>
	Provide procurement and contract guidance to budget holders and cross-functional site teams.
	
	<li>
	Ensure supply chain and contract compliance in line with client and governance requirements.
	
	<li>
	Deliver detailed reporting on savings, performance, and pipeline activity to senior stakeholders.
	
	<li>
	Contribute to annual budget planning and long-term contracting strategies.
	
</ul>

Desirable Skills & Experience

<ul>
	<li>
	Proven experience in both procurement and contract management, ideally within manufacturing, chemcials, industrial or complex operational environments.
	
	<li>
	Track record of delivering measurable cost reduction through strategic sourcing and contracting.
	
	<li>
	Experience leading high-value ITTs, supplier negotiations, and contract implementation.
	
	<li>
	Strong understanding of terms & conditions, forms of contract, and contracting strategies.
	
	<li>
	Comfortable working to challenging, target-driven objectives.
	
	<li>
	Confident communicator with the ability to influence stakeholders at all levels.
	
	<li>
	CIPS qualified or working towards (or equivalent industry experience).
	
</ul>

What You’ll Bring

<ul>
	<li>
	A commercially sharp, analytical mindset with strong attention to detail.
	
	<li>
	Confidence operating as a subject matter expert in procurement and contracts.
	
	<li>
	A pragmatic, solutions-led approach in client-facing environments.
	
	<li>
	Strong stakeholder management skills and the ability to build credibility quickly.
	
	<li>
	A commitment to compliance, governance, and best practice.
	
</ul>

If you enjoy roles where procurement isn’t just about process but about influence, savings, and delivery, this is a strong opportunity to make your mark.

For more information or to apply, contact Skye Madden – Managing Consultant at Jackson Hogg.

Contracts and Procurement Manager

Supply Chain Planner

Melsonby | Full-time | £28,000 – £32,000

If you’re a supply chain professional who enjoys planning, problem-solving, and keeping production moving, this could be a great next step. This is a hands-on Supply Chain Planner role where you’ll play a central part in the Supply Chain planning function ensuring materials are available, inventory is controlled, and customer orders are delivered on time.

Working within an electronics manufacturing environment, you’ll sit at the heart of planning, procurement, logistics, and inventory translating demand into actionable supply plans and keeping everything aligned across operations.

Responsibilities 

<ul>
	<li>
	Plan and coordinate the supply of electronic components and assemblies to support production schedules and customer demand.
	
	<li>
	Maintain accurate material, supplier, and planning data within the ERP/MRP system, ensuring BOM and lead time integrity.
	
	<li>
	Control inventory levels across raw materials, sub-assemblies and finished goods, improving stock accuracy and turns.
	
	<li>
	Work closely with operations, engineering, and warehouse teams to align materials with build plans and despatch activity.
	
	<li>
	Monitor and report on key supply chain KPIs, contributing to continuous improvement and planning efficiency.
	
</ul>

If you’re commercially aware, comfortable balancing supply and demand, and want a role where planning genuinely matters — this is well worth a conversation.

For more information or to apply, contact Skye Madden – Managing Consultant at Jackson Hogg.

Supply Chain Planner

<h2>Principal Civil Engineer – Infrastructure & Development Projects</h2>

We are working with a well-established, multi-disciplinary engineering consultancy delivering civil infrastructure solutions across the UK. The business supports a broad range of development, infrastructure and regeneration projects, working closely with developers, public sector bodies and contractors.

This is an excellent opportunity for a Civil Engineer who enjoys owning projects, engaging with clients, and developing technically within a collaborative consultancy environment.

<h3>The Role</h3>

You will be responsible for the design and delivery of civil engineering packages across multiple projects, from early feasibility through to detailed design and construction support. The role offers genuine variety and the opportunity to work alongside structural, geotechnical, transport and environmental specialists.

Key responsibilities include:

<ul>
	<li>
	Design of civil infrastructure including:

	<ul>
		<li>
		Highways and access roads
		
		<li>
		Drainage (foul, surface water, SuDS)
		
		<li>
		Earthworks, levels and site-wide infrastructure
		
	</ul>
	
	<li>
	Preparation of technical drawings, reports and calculations
	
	<li>
	Coordination with internal disciplines and external stakeholders
	
	<li>
	Supporting planning submissions and technical approvals (e.g. S278 / S38)
	
	<li>
	Managing your own workload across several live projects
	
	<li>
	Providing technical input into bids and proposals where required
	
	<li>
	Acting as a professional, client-facing representative of the consultancy
	
</ul>

<h3>About You</h3>

This role would suit a Senior to Principal Civil Engineer with a strong grounding in UK civil infrastructure design and a practical, delivery-focused mindset. 
 
Your Background: 

<ul>
	<li>
	A degree in Civil Engineering or similar
	
	<li>
	Experience working within a UK civil or infrastructure consultancy
	
	<li>
	Broad technical capability rather than a narrow specialism
	
	<li>
	Confidence communicating with clients, local authorities and contractors
	
	<li>
	An understanding of constructability, cost and programme impacts
	
	<li>
	A proactive approach to problem-solving and project ownership
	
</ul>

<h3>What’s on Offer</h3>

<ul>
	<li>
	Exposure to a wide variety of development and infrastructure projects
	
	<li>
	A supportive environment with clear technical and career progression
	
	<li>
	Consistent progression opportunities to reach Director and Associate-level roles
	
	<li>
	Long-term stability within a respected consultancy
	
	<li>
	Competitive salary and benefits aligned to regional markets
	
</ul>

<h3>Who This Role Is For</h3>

This position is ideal for engineers seeking long-term career development, meaningful client exposure, and involvement in projects from concept to completion. It will particularly appeal to those who value regional project delivery and a balanced consultancy environment.

Principal Civils Engineer 

Project Accountant 
County Durham 
 
Jackson Hog are delighted to be working with a superb business in County Durham who are seeking to recruit a Project Accountant in a newly created role. 
 
Working in a key role you will have broad duties and responsibilities and be working as part of a talented team. 
 
Duties and responsibilities include;
<ul>
	<li>Collaborating closely with the project management team to provide strong financial insights and guidance, tracking both progress and financial performance.
	<li>Monitor project expenditure against planned costs and variance reporting.
	<li>Monitor revenue recognition and project profitability.
	<li>Proactively undertake cost analysis of direct cots and project costs to identify cost-saving opportunities and improve project efficiency.
	<li>Margin analysis of projects in both engineering and manufacturing.
	<li>Compute and prepare cost rate decks.
	<li>Support funding applications and manage grant reporting requirements.
	<li>Analysing inventory and segment by project ensuring accurate inventory valuation.
	<li>Capitalisation of development costs and R&D tax credit computations.
	<li>Assisting in preparation of annual budgets and ongoing forecast data for input into financial planning tools.
	<li>Developing and streamlining financial systems and processes for better project financial management.
	<li>Ensuring compliance with financial procedures and internal controls.
	<li>Adhoc support to the finance team including audit requirements.
</ul>
You will be/have:

<ul>
	<li>A Qualified Accountant - ACCA/CIMA/ACA
	<li>Excellent communication skills and the confidence to liaise with internal departments and senior leaders.
	<li>Proficient in the use of financial software and analysis tools.
</ul>

Project Accountant

Finance Business Partner 
County Durham 
 
Jackson Hogg are delighted to be supporting a fantastic business in County Durham in their search of a Finance Business Partner. 
 
Working for an exciting business you will be joining a growing finance team who are keen to hire someone dynamic and ambitious and provide key financial insights. 
 
Duties and responsibilities include:
<ul>
	<li>Prepare and analyse financial reports to support strategic decision making.
	<li>Assisting in budgeting, forecasting and financial planning processes.
	<li>Analysing financial performance and identify trends and variances with good collaboration with each of the department heads.
	<li>Analyse variances between actual results and the business plan/forecast, providing recommendations for corrective actions.
	<li>Support scenario planning to evaluate potential financial outcomes under different business conditions.
	<li>Develop and streamline financial systems and processes for improved financial management including automation of monthly reporting.
</ul>
 
You will be have:

<ul>
	<li>Ideally a qualified Accountant - CIMA/ACA/ACCA
	<li>Strong communication skills - ability to influence key stakeholders.
	<li>Proficient in the use of financial software and analysis tools.
	<li>Excellent Excel skills.
</ul>

Finance Business Partner

Senior Analyst 

Contract role. Inside IR35 (PAYE). Rate DOE but circa £25 - £35 per hour 
 
Day-to-day responsibilities
<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Use Computer Aided Design (CAD) software to create 2D and 3D technical drawings.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Calculate dimensions and material requirements.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Edit engineering drawings based on the recommendations of engineers.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Be responsible to produce fabrication drawings upon request, to the relevant standards and procedures.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Support the maintenance of our Product Data Management System.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Review information for completeness and accuracy.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Prepare assembly and detailed drawings based on information and instruction provided, including conceptual layouts and storyboarding operations.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Deliver drawings within an appropriate timescale and to a high level of quality.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Maintain knowledge of company standards and incorporate these into engineering design.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Perform other duties and responsibilities as may be assigned from time to time.
</ul>
 
 
Person specification

<ul>
	<li style="margin-bottom: 4.0pt;margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Team focused.
	<li style="margin-bottom: 4.0pt;margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Strong maths skills and attention to detail.
	<li style="margin-bottom: 4.0pt;margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Draughting experience with suitable qualifications.
	<li style="margin-bottom: 4.0pt;margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Proficient as a team player with excellent communication skills , but also able to work on own initiative.
</ul>
 
 
Applicant requirements

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Proficient use of Autodesk Inventor.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Minimum of 5 years of experience required 
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Experience using MS Office package.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Ability to produce clear and informative production drawings and technical information.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Works systematically to ensure completion of tasks to meet deadlines and clients’ expectations.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Excellent organisational and planning skills.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Ability to effectively prioritise workload.
</ul>

Draughtsperson 

Technical Specialist - HV Power & OT Cyber

Teesside, North East

Salary: up to £75,000 basic + benefits

Jackson Hogg is thrilled to be exclusively partnering with a growing business based in Teesside, looking to bring a Technical Specialist to their team to be the subject matter expert across the business for HV Power and OT Cyber.. 

Working closely with operational and sales teams in delivery and pre-sales, the role will guide and develop the solutions that this client provides.  As part of the role, the Technical Specialist will develop a team of engineers to deliver complex solutions in the areas of both OT Cyber and Power, with key skills in certifications such as IEC 62443 and IEC 61850.

Technical Specialist Key Responsibilities

Project Delivery & Technical Leadership

<ul>
	<li>Act as the technical lead for cyber security across all the business and support engineering teams and customers with subject matter expertise
	<li>Act as the technical lead for Transmission and Distribution related work supporting operational delivery with emphasis on high-voltage capability
	<li>Lead technical definition, design, and implementation of secure systems
	<li>Ensure compliance with standards and best practice
	<li>Support FAT, SAT, installation, commissioning, and fault-finding
	<li>Provide technical assurance and reviews
	<li>Build and develop a team of engineers to deliver power sector projects
</ul>

Pre-Sales, Bids & Tendering

<ul>
	<li>Support pre-sales and solution development
	<li>Prepare tenders, proposals, and cost estimates
	<li>Assist customer engagement during bid phases
</ul>

Collaboration & Mentoring

<ul>
	<li>Mentor engineers and support skills development
	<li>Provide technical consultancy to colleagues and customers
	<li>Foster a culture of collaboration and excellence
</ul>

Technical Specialist Key Requirements:

<ul>
	<li>Full project lifecycle experience
	<li>OT cyber security expertise (desirable)
	<li>HV systems experience (main area)
	<li>Technical documentation skills
	<li>Degree or HND/HNC in relevant discipline
	<li>Eligible for security clearance
	<li>IEC 62443 / IEC 61850 / ISO 27001 knowledge
	<li>Industrial networking and firewalls
	<li>PLC/SCADA/DCS experience
</ul>

Attributes

<ul>
	<li>Adheres and champions company core values – Accountability, Communication, Entrepreneurial, Inspiring and Team Player
	<li>Is commercially astute
	<li>Must be able to manage the production of all documentation relevant to their area of responsibility to a high standard
	<li>Must at all times seek to achieve the highest standards of professional behaviour when dealing with clients, and colleagues.
	<li>You will be a collaborative mentor, motivating others to develop technical capabilities.
	<li>Hardworking with a positive can-do attitude to delivery and learning new skills.
</ul>

This is a permanent role based in Teesside with flexible working hours and early Friday finish at 1 pm. Great benefits package provided on offer.

If you are interested in this role please get in touch with Eleni at 07415558839 or submit your CV at eleni.avgenaki@jacksonhogg.com

Technical Specialist - HV Power & OT Cyber

Structural Steel Plater 
Richmond, North Yorkshire 
Jackson Hogg is recruiting a Structural Steel Plater on behalf of a well-established client based in Richmond, North Yorkshire. This is a temp-to-perm opportunity, offering long-term employment following a successful temporary period. 
The Role 
You will be working within a structural steel fabrication environment, carrying out plating duties on heavy steel components. The role requires the ability to work accurately from engineering drawings, carry out heat straightening where required, and meet production targets while maintaining high safety and quality standards. 
Key Responsibilities
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Plating structural steel components using plate thicknesses ranging from 5mm to 100mm
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Reading and interpreting engineering drawings
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carrying out heat straightening where required
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Using grinders and associated consumables in line with HAVS regulations
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Operating overhead cranes and lifting equipment safely
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Working to production targets and quality standards
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Adhering to all health, safety, environmental, and quality procedures
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Supporting training activities and undertaking other reasonable duties as required
</ul>
Requirements

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Time-served Plater or equivalent qualifications (trade test required)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience working in heavy engineering or structural steel fabrication
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Confident working from engineering drawings
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience using overhead cranes and slinging techniques
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to work independently and as part of a team
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong safety awareness and attention to detail
</ul>
Working Hours & Pay

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Monday to Friday: 6.00am – 2.30pm
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Saturday overtime: 7.30am – 12.30pm, paid at 1.5x basic rate
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Pay rate: £17.62 per hour
</ul>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Temp-to-perm opportunity
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Day shift working pattern
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Overtime available
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Long-term work with a reputable structural steel employer
</ul>
Apply today or contact Jackson Hogg for further information.

Plater

Job Title: Press Brake Operative (Experienced) 
Location: Ferryhill, County Durham 
Pay Rate: £13.29 – £15.94 per hour (dependent on experience) 
Hours of Work:
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Training Period: Day shift, 8:00am – 5:00pm, Monday to Friday
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Post-Training: Two-shift rotation, Monday to Friday
	<ul style="list-style-type: circle;">
		<li style="margin: 0.0cm 0.0cm 8.0pt;">Early Shift: 6:00am – 2:30pm
		<li style="margin: 0.0cm 0.0cm 8.0pt;">Late Shift: 2:30pm – 11:00pm
	</ul>
	
</ul>
Company Overview 
Our client is a well-established sheet metal fabrication company based in Ferryhill, supplying fabricated components to a range of industrial customers. Due to ongoing growth, they are looking to recruit an experienced Press Brake Operative to strengthen their production team. 
Role Overview 
This role requires an experienced Press Brake Operative capable of setting up and operating press brake machinery to produce high-quality sheet metal components in line with engineering drawings, tolerances, and production deadlines. 
Key Responsibilities

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Set up and operate press brake machinery independently
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Read and interpret engineering and fabrication drawings
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Select correct tooling and materials for each job
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Produce components to specified tolerances and quality standards
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carry out first-off, in-process, and final quality checks
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ensure work is completed safely and in line with company procedures
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Identify and report faults, defects, or machine issues
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Meet daily production targets and maintain consistent output
</ul>
Skills and Experience (Essential)

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proven, hands-on experience operating press brake machines in a sheet metal fabrication environment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong ability to read and work from engineering drawings
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Solid understanding of bending sequences, tolerances, and material types
	<li style="margin: 0.0cm 0.0cm 8.0pt;">High level of accuracy and attention to detail
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to work independently with minimal supervision
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Willingness to work a rotating two-shift pattern following training
</ul>
Desirable

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">CNC press brake experience
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience working in a production or high-volume fabrication environment
</ul>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Competitive hourly rate of £13.29 – £15.94 per hour
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Initial day-shift training period
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Long-term opportunity with a stable and growing fabrication business
</ul>

Press Brake Operator

Job Title: MIG Welder (Experienced) 
Location: Ferryhill, County Durham 
Pay Rate: £14.00 – £16.80 per hour 
Hours of Work:
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Day Shift (Training / Initial Period): 8:00am – 5:00pm, Monday to Friday
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Post-Training: Two-shift rotation, Monday to Friday
	<ul style="list-style-type: circle;">
		</ul><li style="margin: 0.0cm 0.0cm 8.0pt;">Early Shift: 6:00am – 2:30pm
		<li style="margin: 0.0cm 0.0cm 8.0pt;">Late Shift: 2:30pm – 11:00pm
	</ul>
	

Company Overview 
Our client is a well-established sheet metal fabrication company based in Ferryhill, supplying welded and fabricated components to a range of industrial sectors. Due to continued growth, they are seeking an experienced MIG Welder to join their production team. 
Role Overview 
The MIG Welder will be responsible for welding mild steel components to a high standard, working from engineering drawings and production schedules within a fast-paced fabrication environment. 
Key Responsibilities

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carry out MIG welding on fabricated sheet metal and structural components
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Work from engineering drawings and weld symbols
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Set up welding equipment and select appropriate consumables
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Produce high-quality welds to required specifications and tolerances
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carry out visual inspections and basic quality checks
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintain a clean, safe, and organised workstation
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Meet production targets while maintaining quality standards
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Report defects, rework requirements, or equipment issues
</ul>
Skills and Experience (Essential)

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proven MIG welding experience within a fabrication or manufacturing environment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to read and understand engineering drawings and weld symbols
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience welding mild steel (thin to medium gauge)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong attention to detail and quality
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to work independently with minimal supervision
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Willingness to work a rotating two-shift pattern after training
</ul>
Desirable

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience working in a high-volume or production welding environment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Previous experience welding sheet metal components
</ul>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Competitive hourly rate of £14.00 – £16.80 per hour
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Initial day-shift training period
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Long-term opportunity with a stable and growing fabrication business
</ul>

Welder Fabricator

Operations Director

<h2>Stone Worktop Finisher</h2>

Location: Middlesbrough 
Job Type: Permanent, Full-Time 
Shift Pattern: Monday to Friday – rotating shifts 
• 06:00–14:30 
• 13:30–22:00

Salary: £33,488 – £38,272 per annum (including shift allowance), DOE

Jackson Hogg is proud to be supporting a rapidly growing, family-owned manufacturing business in Middlesbrough, in the appointment of a Stone Worktop Finisher.

Due to continued growth, this is an excellent opportunity to join a modern, forward-thinking business producing high-quality bespoke quartz and stone worktops.

<hr />
<h3>The Role</h3>

As a Stone Worktop Finisher, you will be responsible for the finishing, polishing, and quality inspection of bespoke stone and quartz worktops within a factory environment.

This role would suit candidates with experience in stone worktops, quartz, granite, CNC finishing, polishing, or precision manufacturing, as well as individuals from other manufacturing backgrounds with strong hand-tool skills.

<hr />
<h3>Key Responsibilities</h3>

<ul>
	<li>
	Finishing and polishing quartz and stone worktops
	</li>
	<li>
	Edge profiling, honing, and detailing to specification
	</li>
	<li>
	Inspecting finished products for defects or imperfections
	</li>
	<li>
	Operating hand tools and machinery including wet polishers, grinders, and CNC equipment
	</li>
	<li>
	Reading and following production job cards and work instructions
	</li>
	<li>
	Ensuring all work meets quality standards before dispatch
	</li>
	<li>
	Maintaining a clean and safe working environment
	</li>
	<li>
	Safe handling and movement of stone products using lifting equipment
	</li>
	<li>
	Working collaboratively with production and finishing teams
	</li>
</ul>

<hr />
<h3>Skills &amp; Experience</h3>

<ul>
	<li>
	Experience in stone worktops, quartz, granite, or solid surface finishing (desirable)
	</li>
	<li>
	Experience using hand tools, grinders, polishers, or CNC machinery
	</li>
	<li>
	Background in manufacturing, engineering, or precision production advantageous
	</li>
	<li>
	Strong attention to detail and quality-focused mindset
	</li>
	<li>
	Reliable, motivated, and able to work rotating shifts
	</li>
</ul>

Training can be provided for candidates with transferable skills from other industries.

<hr />
<h3>What’s On Offer</h3>

<ul>
	<li>
	Competitive salary with shift allowance
	</li>
	<li>
	Permanent, stable employment
	</li>
	<li>
	Opportunity to work with modern machinery and technology
	</li>
	<li>
	Training and long-term progression opportunities
	</li>
	<li>
	Supportive and growing team environment
	</li>
</ul>

Finisher 

Proposals Engineer

We are recruiting for an experienced Proposals Engineer to join a well-established automation and control systems business. Reporting to the Senior Proposals Manager, you will be responsible for producing high-quality technical and commercial proposals, ranging from PLC and SCADA systems through to full turnkey solutions.

This is a varied and technically engaging role, working closely with customers, sales teams, suppliers, and internal engineering teams to deliver accurate and competitive proposals.

Key Responsibilities

<ul>
	<li>
	Produce detailed technical proposals, quotations, and tenders for automation and control projects.
	
	<li>
	Develop solutions including PLC and SCADA systems, upgrades, training, service level agreements, digital solutions, management information systems, manpower support projects, and full turnkey solutions.
	
	<li>
	Work closely with customers and sales teams to fully understand requirements and exceed expectations.
	
	<li>
	Prepare accurate quotation cost spreadsheets covering hardware, software, and engineering elements.
	
	<li>
	Liaise with suppliers to obtain pricing and with engineering teams to define timescales and engineering effort.
	
	<li>
	Ensure all proposals are accurate, well-written, and professionally presented.
	
	<li>
	Manage internal approval processes with project managers, operations, and senior stakeholders.
	
	<li>
	Build and maintain strong, professional customer relationships.
	
	<li>
	Respond promptly to customer enquiries and tender requirements.
	
</ul>

Skills and Experience

<ul>
	<li>
	Experience in a proposals, estimating, applications, or technical sales role within automation or engineering.
	
	<li>
	Strong understanding of PLC and SCADA based solutions.
	
	<li>
	Excellent attention to detail with a high level of accuracy in quotations.
	
	<li>
	Strong written English and communication skills.
	
	<li>
	Comfortable working with cost spreadsheets and technical documentation.
	
	<li>
	Able to work collaboratively across sales, engineering, and operations.
	
</ul>

The Role

<ul>
	<li>
	Varied workload with exposure to a wide range of projects.
	
	<li>
	Opportunity to develop technical and commercial skills.
	
	<li>Long-term, customer-focused environment with an emphasis on quality and collaboration.
</ul>

Benefits

<ul>
	<li>
	Holiday entitlement of up to 25 days, with additional holidays awarded for long service
	
	<li>
	Pension enrolment after 3 months’ service
	
	<li>
	Health care available after 12 months’ service
	
</ul>

Proposal Engineer

Location: Middlesbrough 
Employment Type: Permanent, Full-Time 
Shift Pattern: Monday to Friday – 2-shift rotation 06:00–14:30 -13:30–22:00

Salary: £33,488 – £38,272 per annum (including shift allowance), dependent on experience

Jackson Hogg is supporting a rapidly growing, family-owned manufacturing business in the Teesside area with the appointment of an experienced CNC Operator. Due to continued and significant growth, this is an excellent opportunity to join a modern manufacturing environment with ongoing investment and development.

The successful candidate will be an experienced, detail-oriented CNC Setter/Operator with a strong focus on quality, accuracy, and efficiency.

<h3>The Role</h3>

As a CNC Operator, you will be responsible for the machining and finishing of bespoke quartz and stone worktops, working to tight tolerances and high quality standards.

<h3>Key Responsibilities</h3>

<ul>
	<li>
	Operating and setting CNC machinery to cut, shape, and finish quartz and stone worktops
	
	<li>
	Setting up machines, tooling, and CNC programs
	
	<li>
	Reading and working from technical drawings, job cards, and digital work orders
	
	<li>
	Inspecting finished products for defects, chips, or imperfections
	
	<li>
	Ensuring all products meet company quality standards prior to dispatch or installation
	
	<li>
	Loading and unloading stone slabs safely using appropriate lifting equipment
	
	<li>
	Monitoring machine performance and carrying out basic adjustments
	
	<li>
	Routine machine maintenance and housekeeping
	
	<li>
	Working to production schedules and health & safety requirements
	
	<li>
	Collaborating with fabricators, installers, and designers to ensure product quality
	
	<li>
	Participating in training and continuous improvement initiatives
	
</ul>

<h3>Key Requirements</h3>

<ul>
	<li>
	Minimum 5 years’ experience as a CNC Setter/Operator
	
	<li>
	Previous experience within the stone industry (granite and/or quartz) is highly desirable
	
	<li>
	Strong ability to read technical drawings and job specifications
	
	<li>
	High attention to detail and pride in workmanship
	
	<li>
	A reliable, team-oriented approach
	
</ul>

<h3>What’s on Offer</h3>

<ul>
	<li>
	Competitive salary with shift allowance
	
	<li>
	Modern CNC machinery and facilities
	
	<li>
	Long-term job security within a growing business
	
	<li>
	Opportunities for progression and skills development
	
</ul>

CNC Setter Operator

<h2>Production Supervisor (Shift)</h2>

Location: Middlesbrough 
Employment Type: Permanent, Full-Time 
Shift Pattern: Monday to Friday – rotating shifts 
• 06:00–14:30 
• 13:30–22:00

Salary: £38,000 per annum + 15% shift allowance (£43,700 total)

Jackson Hogg is supporting a rapidly growing, family-owned manufacturing business in Middlesbrough with the appointment of an experienced Production Supervisor (Shift). This is an excellent opportunity to join a highly innovative and performance-driven organisation with strong values, a people-first culture, and significant ongoing investment.

<hr>
<h3>The Role</h3>

As Production Supervisor, you will lead a shop-floor operation producing bespoke, high-quality products within a fast-paced manufacturing environment. You will be responsible for managing a shift team of 20–30 operators, supported by Team Leaders, ensuring production targets are achieved safely, efficiently, and right first time.

This is a hands-on leadership role, requiring a proactive approach, strong people management skills, and a passion for continuous improvement.

<hr>
<h3>Key Responsibilities</h3>

<ul>
	<li>
	Lead by example to ensure safe working practices are maintained and continuously improved
	
	<li>
	Manage day-to-day shop floor operations to meet safety, quality, delivery, cost, and people targets
	
	<li>
	Set, monitor, and react to variances in production performance
	
	<li>
	Ensure required quality standards are achieved, meeting RFT and OTIF targets
	
	<li>
	Coach, develop, and engage Team Leaders and operators to unlock full team potential
	
	<li>
	Drive a continuous improvement culture using Lean CI methodologies and structured problem-solving
	
	<li>
	Lead and support improvement projects, ensuring delivery on time and in full
	
	<li>
	Promote Total Productive Maintenance (TPM) to maximise equipment availability
	
	<li>
	Liaise closely with HR, Supply Chain, Planning, Maintenance, Sales, Customer Service, and Finance
	
	<li>
	Manage attendance, timekeeping, shift coverage, and early-stage disciplinary processes
	
	<li>
	Deliver Toolbox Talks, safety briefings, and ensure compliance with company policies
	
	<li>
	Ensure all internal and external audit requirements are met
	
</ul>

<hr>
<h3>Experience Required</h3>

<ul>
	<li>
	3–5 years’ experience in a production leadership role within a manufacturing environment
	
	<li>
	Proven track record of leading teams of 20–30 employees across shift patterns
	
	<li>
	Strong safety leadership with experience working towards an injury-free workplace
	
	<li>
	Demonstrated ability to deliver sustained productivity and cost improvements
	
	<li>
	Strong employee engagement, coaching, and stakeholder management skills
	
	<li>
	Experience using Root Cause Analysis (RCA / RCT) to proactively address issues
	
	<li>
	Confident communicator with the ability to drive change while maintaining engagement
	
</ul>

<hr>
<h3>Qualifications & Training</h3>

<ul>
	<li>
	Minimum 2 years’ experience using Lean CI tools to drive measurable improvements
	
	<li>
	Experience handling disciplinary and grievance processes
	
	<li>
	Numerate with strong data analysis skills
	
	<li>
	Competent with Microsoft Office
	
	<li>
	BTEC Higher Professional Diploma or NVQ Level 4
	
	<li>
	IOSH Health & Safety Management qualification – desirable
	
	<li>
	Experience within a stone or high-precision manufacturing environment – desirable
	
</ul>

<hr>
<h3>Skills & Behaviours</h3>

<ul>
	<li>
	Strong people management and engagement skills
	
	<li>
	Financial awareness and budget control
	
	<li>
	Confident decision-maker with a structured, procedural mindset
	
	<li>
	Excellent organisational and prioritisation skills
	
	<li>
	High attention to detail and data-led approach
	
	<li>
	Able to work autonomously and as part of a wider leadership team
	
	<li>
	Comfortable leading change in a growing business environment
	
</ul>

Production Shift Supervisor

Reports To: Chief Engineer 
Position Overview 
We're seeking a highly analytical and systemic Process Engineer to support ongoing test bench operation and maintenance activities. This role is critical in ensuring our next-generation ultrasonic and mechanical metering solutions meet stringent US regulatory standards while bridging the gap between physical hydraulic testing and advanced information systems. 
The ideal candidate will possess a deep understanding of AWWA standards, test bench architecture, and the ability to evaluate hydraulic data to facilitate continuous improvement activities. 
Key Responsibilities 
1. Test Bench
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Participate in the design, optimization, and maintenance of our high-precision test benches for both Ultrasonic (AWWA C715) and Mechanical (AWWA C700/C708) water meters
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Contribute expertise to support technical component selection, including high-efficiency pumps, precision reference meters, control valves, VFDs, peripheral sensors, etc. to ensure system integrity, accuracy and longevity
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Support ongoing test bench operation and maintenance activities 
</ul>
2. Production Equipment and Systems

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Optimize product flow through the assembly and testing processes
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Contribute to various continuous process improvement projects
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Seek out and suggest improvements in safety and ergonomics
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Determine opportunities for mechanization/automation of processes
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Assist in developing visual production systems for tracking team-member performance
</ul>
 
 
3. Standards, Regulations & Compliance

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Act as the subject matter expert on US market regulations, ensuring all designs and testing protocols comply with the latest NSF / EPA / Safe Drinking Water Act and ANSI/AWWA standards
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Establish and maintain rigorous quality control benchmarks to ensure meter accuracy remains within the allowable error range
</ul>
3. Connectivity & Information Systems

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Manage the connectivity between physical test benches and enterprise information systems
</ul>
4. Data Analysis & Troubleshooting

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Data analysis capabilities to determine process quality and reliability
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Use of statistical tools for process analysis
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Use of digital tools for data analysis and performance monitoring (Excel, BI…)
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Work and data extraction from ERP, BI, MES systems
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Provide solutions for process and quality issues arising in calibration
</ul>
Requirements & Qualifications 
Core Prerequisites:

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Education: Bachelor’s Degree in Mechanical, or Civil (Hydraulic) Engineering (or a related field)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience: Minimum of 3 years of experience in process engineering, preferably within water works or hydraulic systems
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Multidisciplinary Proficiency: Demonstrated understanding of systems involving mechanical components, hydraulic flow dynamics, and software/PLC integration
</ul>
Technical Skills:

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to learn and understand test bench processes in-depth (hydraulics + process)
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Ability to learn and understand water meter functionality and the parameters influencing meter functionality and KPI of the calibration  process
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proficiency in database analysis tools and statistical software
</ul>
Preferred Qualities:

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to communicate complex technical conclusions to non-engineering stakeholders
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proven track record of designing "smart" infrastructure that connects physical hardware to digital cloud environments
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Familiarity with the AWWA Manuals and Standards.
	<ul style="list-style-type: circle;">
		<li style="margin: 0.0cm 0.0cm 8.0pt;">M6 Manual for Water Meters
		<li style="margin: 0.0cm 0.0cm 8.0pt;">AWWA Specifications; C700, C708 and C715 for Water Meters
	</ul>
	
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to work in a Team Environment to facilitate continuous improvement
</ul>

Process Engineer 

Business Development Advisor - Neuro & Pain

Drug Discovery & Development Advisor

Business Development Executive – Part or Full Time – Flexible Working – Blyth
Are you motivated by building relationships, spotting opportunities, and driving growth? We are looking for a Business Development Executive to join a dynamic engineering and manufacturing-focused team. This is a flexible role with options for part-time or full-time working.

About the Role 
 
As a Business Development Executive, you will help build and nurture a strong sales pipeline by engaging with target organisations that value collaboration and innovation. You will be responsible for generating new opportunities, managing early-stage sales processes, and supporting account development.

Key Responsibilities

<ul>
	<li>
	Identify and research new business opportunities and provide market insights
	
	<li>
	Make first contact with decision-makers via calls, emails, and social media
	
	<li>
	Develop and nurture accounts through follow-up activities
	
	<li>
	Build and maintain strong relationships with potential customers
	
	<li>
	Work closely with internal teams to ensure timely and effective actions
	
	<li>
	Provide account management support as required
	
	<li>
	Maintain accurate records and updates in the CRM system
	
	<li>
	Report on account development and pipeline progress
	
	<li>
	Support wider sales and business activities as needed
	
</ul>

Skills and Experience

<ul>
	<li>
	Proven experience in Sales, Business Development, or Telesales, with track record in prospect identification and cold outreach
	
	<li>
	Experience in an engineering or manufacturing environment is desirable
	
	<li>
	Degree level or equivalent is a plus
	
	<li>
	Confident in cold outreach and developing networks of customers and influencers
	
	<li>
	Excellent communication skills
	
	<li>
	Agile, adaptable, proactive, and customer-focused
	
	<li>
	Able to work independently and as part of a team
	
</ul>

Why Join?

<ul>
	<li>
	Flexible working arrangements including part-time, full-time, or term-time options
	
	<li>
	Be part of a collaborative and ambitious team
	
	<li>
	Opportunity to contribute to exciting engineering projects and make a real impact
	
	<li>
	Supportive and inclusive environment with focus on personal growth and teamwork
	
</ul>

Business Development Executive 

<h2>Senior Software Engineer</h2>

<h3>Role purpose</h3>

Step into a role where your technical expertise drives innovation and your leadership helps shape the next generation of engineers. We’re looking for a Senior Software Engineer to join a growing technology team, playing a key role in the development and maintenance of modern software applications and services.

You’ll work closely with cross-functional teams to deliver robust, scalable, and secure solutions that support a complex, regulated business environment. You’ll also mentor and support junior engineers, enabling them to contribute effectively to team outcomes. 
 

<h3>About you</h3>

<h4>Essential skills and experience:</h4>

<ul>
	<li>
	Expert-level .NET development experience (C#, ASP.NET Core, Entity Framework Core, LINQ) with strong understanding of application architecture, design patterns, and clean code principles.
	
	<li>
	Strong experience building cloud-native solutions on Microsoft Azure, including App Services, Functions, Storage, SQL, Key Vault, monitoring, and identity.
	
	<li>
	Proven CI/CD expertise using Azure DevOps, including YAML pipelines, automated testing, release management, and environment configuration.
	
	<li>
	Solid understanding of API design and integration, including RESTful services, microservices, messaging/queues, and secure communication patterns.
	
	<li>
	Strong testing mindset with experience in automated unit and integration testing (e.g. NUnit, mocking frameworks, test pipelines).
	
	<li>
	Experience with containerisation and infrastructure-as-code, including Docker, Kubernetes/managed container platforms, and tools such as Terraform.
	
	<li>
	Excellent problem-solving and troubleshooting skills.
	
	<li>
	Strong communication skills and the ability to collaborate effectively across multidisciplinary teams.
	
</ul>

Senior Software Engineer

A global pharmaceutical CDMO, recognized as a leader in the development and manufacturing of active pharmaceutical ingredients (APIs), is seeking to strengthen its Sales organization.

The company operates multiple manufacturing sites and R&D centers worldwide, integrating chemical synthesis and biological processes while adhering to the highest international standards of safety, quality, and environmental compliance.

<h3>Position: Senior Area Manager</h3>

The selected candidate will be responsible for:

<ul>
	<li>
	Developing strong, senior-level relationships with decision-makers, technical stakeholders, and regulatory functions within strategic customer accounts
	
	<li>
	Identifying and driving new growth opportunities by expanding product portfolios and supply volumes
	
	<li>
	Coordinating commercial, technical, and regulatory activities to ensure excellent customer service and effective management of complex projects
	
	<li>
	Negotiating supply contracts, framework agreements, pricing, and commercial terms to secure optimal margins
	
	<li>
	Collaborating closely with internal functions (Quality, Regulatory Affairs, R&D, Supply Chain, Finance, Production) to ensure successful project execution and customer satisfaction
	
	<li>
	Monitoring market trends, competitive dynamics, and regulatory developments to inform commercial strategies
	
	<li>
	Representing the organization at strategic meetings, international trade fairs, and industry conferences
	
	<li>
	Working closely with a team of Area Managers, fostering a collaborative, results-driven culture
	
</ul>

<h3>Requirements</h3>

Education

<ul>
	<li>
	MSc in a scientific discipline (Chemistry, Chemical Technologies, Biotechnology, Pharmacy) 
	or
	
	<li>
	Degree in Economics with a strong focus on the pharmaceutical sector
	
</ul>

Experience

<ul>
	<li>
	8–10+ years of commercial experience within the API, CDMO, or pharmaceutical ingredients industry
	
	<li>
	Proven track record managing strategic international accounts and negotiating complex commercial agreements
	
	<li>
	Strong knowledge of GMP regulations and regulatory processes (DMF, CEP, ANDA), as well as generic and branded market dynamics
	
</ul>

Technical Skills

<ul>
	<li>
	Solid understanding of the pharmaceutical product life cycle and generic market dynamics
	
	<li>
	Ability to interpret technical and regulatory documentation
	
	<li>
	Proficient use of CRM systems and standard Office productivity tools
	
</ul>

<h3>What’s Offered</h3>

<ul>
	<li>
	A dynamic, fast-evolving international environment that values initiative and personal contribution
	
	<li>
	Structured training programs to support continuous professional development
	
	<li>
	Clear internal career paths with a strong focus on internal growth and leadership development
	
	<li>
	An inclusive workplace that values cultural diversity and different perspectives
	
</ul>

The company is committed to equal employment opportunities and provides a workplace free from discrimination in accordance with applicable local laws.

Senior Area Manager- Generic APIs

Senior HR Advisor, Northumberland 
Salary: £negotiable depending on experience 
 
I'm delighted to be partnering with this ambitious and progressive process engineering company in their search for an Senior HR Advisor. We are looking for a proactive and people-focused HR professional to join the team in Northumberland. This is a key role supporting the business by delivering high-quality HR advice across the full employee lifecycle, ensuring our people practices underpin business strategy, operational delivery, and company values. It's a brand new role and a real chance to make the role your own!

You will act as a trusted partner to managers and employees, providing expert guidance on employee relations, compliance, reward, recruitment, and engagement, supporting both site operations and the wider business. 

<h3>Responsibilities will include (but not limited to):</h3>

<h4>HR Advisory & Employee Relations</h4>

<ul>
	<li>
	Provide day-to-day HR advice to managers and employees on policies, procedures, and best practice
	
	<li>
	Support employee relations matters including disciplinary, grievance, absence, performance, and capability issues
	
	<li>
	Ensure consistent and fair application of HR policies
	
	<li>
	Coordinate occupational health referrals and medical assessments
	
</ul>

<h4>Compliance & Policy</h4>

<ul>
	<li>
	Maintain HR policies and procedures in line with UK employment law
	
	<li>
	Manage and promote the HR SharePoint site
	
	<li>
	Support compliance with industry-specific requirements (offshore working, medicals, certifications, right to work, IR35 awareness)
	
	<li>
	Maintain accurate employee records and HR systems
	
</ul>

<h4>HRIS, Reward, Payroll & Benefits</h4>

<ul>
	<li>
	Collate and process payroll data, managing employee changes
	
	<li>
	Administer benefits, pensions, and insurance schemes
	
	<li>
	Support pay reviews and bonus processes
	
</ul>

<h4>Culture, Engagement & Wellbeing</h4>

<ul>
	<li>
	Support employee engagement and wellbeing initiatives (e.g. neurodiversity training)
	
	<li>
	Act as a trusted point of contact for employee queries
	
	<li>
	Promote an inclusive, safety-focused culture 
	
</ul>

<h4>Recruitment & Workforce Planning</h4>

<ul>
	<li>
	Support recruitment across technical, engineering, offshore, and support roles
	
	<li>
	Advise hiring managers on role profiles, contracts, remuneration, and onboarding
	
	<li>
	Coordinate onboarding and inductions, including offshore compliance
	
	<li>
	Arrange travel and VISA applications for technicians supporting client sites
	
</ul>

<h4>Learning, Development & Performance</h4>

<ul>
	<li>
	Support performance reviews and objective setting
	
	<li>
	Assist with training and development initiatives, including mandatory and technical training
	
	<li>
	Maintain competency matrices and training records
	
	<li>
	Manage the annual training budget
	
</ul>

<h3>Criteria: </h3>

You’ll be an experienced HR professional who is confident operating in a fast-paced, regulated environment.

Essential / Desirable Experience & Skills:

<ul>
	<li>
	CIPD qualification, HR Management degree, or equivalent experience
	
	<li>
	HR experience within oil and gas or manufacturing is preferred 
	
	<li>
	Experience delivering HR projects
	
	<li>
	Strong communication, analytical, and problem-solving skills
	
	<li>
	High level of confidentiality and professionalism
	
	<li>
	Ability to prioritise, multitask, and work under pressure
	
	<li>
	Strong interpersonal skills with the ability to coach and engage employees
	
	<li>
	A collaborative team player with a proactive mindset
	
</ul>

Senior HR Advisor

Job Title: Assembly Operative (Engineering / Manufacturing) 
Location: Ferryhill, County Durham 
Pay Rate: £14.65 per hour 
Hours of Work:
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Day Shift (Training / Initial Period): 8:00am – 5:00pm, Monday to Friday
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Post-Training: Two-shift rotation, Monday to Friday
	<ul style="list-style-type: circle;">
		</ul><li style="margin: 0.0cm 0.0cm 8.0pt;">Early Shift: 6:00am – 2:30pm
		<li style="margin: 0.0cm 0.0cm 8.0pt;">Late Shift: 2:30pm – 11:00pm
	</ul>
	

Company Overview 
Our client is a well-established manufacturing and sheet metal fabrication company based in Ferryhill. Due to continued growth, they are seeking a capable and experienced Assembly Operative to join their production team. 
Role Overview 
The Assembly Operative will be responsible for assembling mechanical and fabricated components using hand and power tools, working from engineering drawings and assembly instructions to meet quality and production requirements. 
Key Responsibilities

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Assemble components and sub-assemblies to specification
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Use hand and power tools including drills, rivet guns, spanners, torque tools, and similar equipment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Read and interpret engineering drawings and assembly instructions
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carry out quality checks during and after assembly
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Identify and report faults, missing parts, or build issues
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Follow safe working practices and company procedures
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Meet production targets while maintaining quality standards
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintain a clean and organised work area
</ul>
Skills and Experience (Essential)

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Previous experience in a mechanical or manufacturing assembly role
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Confident use of hand and power tools (drills, rivet guns, spanners, etc.)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to read and understand engineering drawings
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Good mechanical aptitude and attention to detail
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to work independently and as part of a team
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Willingness to work a rotating two-shift pattern following training
</ul>
Desirable

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience assembling fabricated or sheet metal components
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Previous experience in an engineering or manufacturing environment
</ul>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Competitive hourly rate of £14.65 per hour
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Initial day-shift training period
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Long-term opportunity within a stable and growing manufacturing business
</ul>

Assembly Operator

Contract Manager – Durham

We are currently partnering with an established UK contractor within road marking and highway maintenance in their search for an experienced Contracts Manager to lead operations across the North East.

 

This role has full responsibility for the operational and commercial performance of existing local contracts, while also playing a key role in growing the regional operation. You’ll manage site teams, act as the main client contact, support recruitment, and help establish a central operational base as the business expands.

 

Key Responsibilities

<ul>
	<li>Manage operational and commercial delivery of regional contracts
	<li>Act as primary client and stakeholder contact
	<li>Lead, develop, and grow site teams
	<li>Plan works and ensure compliance with H&S and quality standards
	<li>Manage budgets, reporting, and support regional growth
</ul>

 

About You

<ul>
	<li>Background in road lining, road marking, or traffic management (preferred but not essential)
	<li>Experience managing highway or local authority contracts
	<li>Commercially aware, self-motivated, and comfortable working autonomously
	<li>Strong leadership and communication skills
</ul>

 

What’s on Offer

<ul>
	<li>Competitive salary + vehicle & benefits
	<li>High level of autonomy
	<li>Clear progression to senior leadership / regional role
</ul>

Contract Manager

Software Developer (Ruby) Inside IR35 Contract 
Senior or Consultant level 
 
This clients approach to software development is collaborative, focused on keeping things simple, and we use test driven development and pair programming as best practice. 
  
Working with clients and key stakeholders is a crucial part of a consultancy role. Their developers are inclusive team players that listen, collaborate, can positively challenge and manage expectations when needed but most of all are always willing to teach and help others. Leaving a client with improved ways of working, working technology and a good experience from discovery through to live is the priority. 
  
Contractors follow the same principles as permanent consultants. The roles are varied, technical, and never confined to any one provider or solution. 
 
Initial 3-month contract starting ASAP   
 Tech stack/skills required:  
<ul>
	<li style="margin: 0.0cm;">Ruby specialist 
</ul>

<ul>
	<li style="margin: 0.0cm;">Prior gov experience will be prioritised but not essential 
</ul>

<ul>
	<li style="margin: 0.0cm;">Available to interview and start at short notice 
</ul>

<div style="margin-bottom: 0.0cm;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;"> 
SC required (active or eligibility & willing to apply) </div>

Software Developer (Ruby)

HR Generalist, Oldbury 
Salary up to £45,000 
About the Role 
Jackson Hogg are delighted to be partnering with this exciting chemical plant as they look to grow their HR team! This is a brand new role and a real chance to make the role your own. We’re looking for someone who’s ready to take the next step in their HR career. This role sits nicely between a Senior HR Advisor and an HR Business Partner, offering a mix of hands-on HR support and more strategic project work. You’ll work closely with managers and teams across the business, giving practical advice, helping solve problems, and getting involved in the projects that shape how they work. You will work as part of a small HR team alongside an HR Advisor and will report into the HR Manager. 
If you’re a Senior HR Advisor looking for more responsibility, or an early-stage HRBP wanting broader experience, this could be a great role for you!
<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;text-align: center;">
<hr></div>
Responsibilities will include (but not limited to): 
People Support & Employee Relations 
• Give managers clear, practical advice on everything from performance and absence to disciplinary and grievance issues. 
• Support or lead more complex cases, making sure they’re handled fairly and professionally. 
• Coach and guide managers to help them build confidence in managing their teams. 
Day-to-Day HR & Policies 
• Make sure our HR policies are up to date, easy to follow, and used consistently. 
• Work closely with the wider HR team to keep our day-to-day processes running smoothly. 
• Use people data to spot trends and highlight areas we can improve. 
Working With the Business 
• Build good relationships with managers and teams so you understand their goals and challenges. 
• Offer insight and suggestions that help shape decisions around people, teams, and ways of working. 
• Support company-wide projects around reward, wellbeing, engagement, and culture. 
Recruitment and Talent Acquisition 
• The full recruitment lifecycle from interviewing, offer, onboarding and induction 
• Support the wider HR team with projects like updating our performance process, or rolling out engagement initiatives. 
• Help the team deliver change programmes, from restructures to new ways of working. 
People Data & Reporting 
• Pull together regular HR reports and help managers understand what the data means. 
• Look at trends around engagement, turnover, and absence to help guide decisions. 
Criteria: 
Experience & Knowledge 
Experience working in a unionised environment is essential 
• Solid experience in an HR Advisor or generalist role, ideally with some strong ER exposure. 
• A good understanding of how HR partnering works and the confidence to work with senior managers. 
• Experience getting involved in or running small HR projects. 
Skills & Style 
• Great at building relationships and working with different people. 
• Able to balance hands-on tasks with bigger-picture thinking. 
• Comfortable coaching managers and having honest, constructive conversations. 
• Strong attention to detail and good at juggling priorities. 
• Confident with data and turning insights into simple explanations. 
• Good knowledge of UK employment law and HR best practice. 
Qualifications 
• CIPD Level 5 (or equivalent experience) is ideal

HR Generalist (Oldbury)

HR Generalist, Billingham 
Salary up to £45,000 
About the Role 
Jackson Hogg are delighted to be partnering with this progressive organisation as they look to grow their HR team! This is a brand new role and a real chance to make the role your own. We’re looking for someone who’s ready to take the next step in their HR career. This role sits nicely between a Senior HR Advisor and an HR Business Partner, offering a mix of hands-on HR support and more strategic project work. You’ll work closely with managers and teams across the business, giving practical advice, helping solve problems, and getting involved in the projects that shape how they work. You will work as part of a small HR team alongside an HR Advisor and will report into the HR Manager. 
If you’re a Senior HR Advisor looking for more responsibility, or an early-stage HRBP wanting broader experience, this could be a great role for you!
<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;text-align: center;">
<hr></div>
Responsibilities will include (but not limited to): 
People Support & Employee Relations 
• Give managers clear, practical advice on everything from performance and absence to disciplinary and grievance issues. 
• Support or lead more complex cases, making sure they’re handled fairly and professionally. 
• Coach and guide managers to help them build confidence in managing their teams. 
Day-to-Day HR & Policies 
• Make sure our HR policies are up to date, easy to follow, and used consistently. 
• Work closely with the wider HR team to keep our day-to-day processes running smoothly. 
• Use people data to spot trends and highlight areas we can improve. 
Working With the Business 
• Build good relationships with managers and teams so you understand their goals and challenges. 
• Offer insight and suggestions that help shape decisions around people, teams, and ways of working. 
• Support company-wide projects around reward, wellbeing, engagement, and culture. 
Recruitment and Talent Acquisition 
• The full recruitment lifecycle from interviewing, offer, onboarding and induction 
• Support the wider HR team with projects like updating our performance process, or rolling out engagement initiatives. 
• Help the team deliver change programmes, from restructures to new ways of working. 
People Data & Reporting 
• Pull together regular HR reports and help managers understand what the data means. 
• Look at trends around engagement, turnover, and absence to help guide decisions. 
Criteria: 
Experience & Knowledge 
• Solid experience in an HR Advisor or generalist role, ideally with some strong ER exposure. 
• A good understanding of how HR partnering works and the confidence to work with senior managers. 
• Experience getting involved in or running small HR projects. 
Skills & Style 
• Great at building relationships and working with different people. 
• Able to balance hands-on tasks with bigger-picture thinking. 
• Comfortable coaching managers and having honest, constructive conversations. 
• Strong attention to detail and good at juggling priorities. 
• Confident with data and turning insights into simple explanations. 
• Good knowledge of UK employment law and HR best practice. 
Qualifications 
• CIPD Level 5 (or equivalent experience) is ideal 
 
HR Generalist, Billingham 
Salary up to £45,000 
About the Role 
Jackson Hogg are delighted to be partnering with this exciting chemical plant as they look to grow their HR team! This is a brand new role and a real chance to make the role your own. We’re looking for someone who’s ready to take the next step in their HR career. This role sits nicely between a Senior HR Advisor and an HR Business Partner, offering a mix of hands-on HR support and more strategic project work. You’ll work closely with managers and teams across the business, giving practical advice, helping solve problems, and getting involved in the projects that shape how they work. You will work as part of a small HR team alongside an HR Advisor and will report into the HR Manager. 
If you’re a Senior HR Advisor looking for more responsibility, or an early-stage HRBP wanting broader experience, this could be a great role for you!

<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;text-align: center;">
<hr></div>
Responsibilities will include (but not limited to): 
People Support & Employee Relations 
• Give managers clear, practical advice on everything from performance and absence to disciplinary and grievance issues. 
• Support or lead more complex cases, making sure they’re handled fairly and professionally. 
• Coach and guide managers to help them build confidence in managing their teams. 
Day-to-Day HR & Policies 
• Make sure our HR policies are up to date, easy to follow, and used consistently. 
• Work closely with the wider HR team to keep our day-to-day processes running smoothly. 
• Use people data to spot trends and highlight areas we can improve. 
Working With the Business 
• Build good relationships with managers and teams so you understand their goals and challenges. 
• Offer insight and suggestions that help shape decisions around people, teams, and ways of working. 
• Support company-wide projects around reward, wellbeing, engagement, and culture. 
Recruitment and Talent Acquisition 
• The full recruitment lifecycle from interviewing, offer, onboarding and induction 
• Support the wider HR team with projects like updating our performance process, or rolling out engagement initiatives. 
• Help the team deliver change programmes, from restructures to new ways of working. 
People Data & Reporting 
• Pull together regular HR reports and help managers understand what the data means. 
• Look at trends around engagement, turnover, and absence to help guide decisions. 
Criteria: 
Experience & Knowledge 
• Solid experience in an HR Advisor or generalist role, ideally with some strong ER exposure. 
• A good understanding of how HR partnering works and the confidence to work with senior managers. 
• Experience getting involved in or running small HR projects. 
Skills & Style 
• Great at building relationships and working with different people. 
• Able to balance hands-on tasks with bigger-picture thinking. 
• Comfortable coaching managers and having honest, constructive conversations. 
• Strong attention to detail and good at juggling priorities. 
• Confident with data and turning insights into simple explanations. 
• Good knowledge of UK employment law and HR best practice. 
Qualifications 
• CIPD Level 5 (or equivalent experience) is ideal

HR Generalist

The Commercial Analyst will support data-driven insights and commercial decision-making for the business. This is a hybrid role, in Newcastle with a salary of £40,000-£45,000 in line with experience. 
 
Responsibilities

<ul>
	<li>
	Provide high-quality financial and commercial analysis to support senior management decision-making, including board papers and business cases.
	
	<li>
	Analyse sales performance, market trends, and competitor activity to inform business strategy.
	
	<li>
	Evaluate new business opportunities, investments, and acquisitions through ROI, risk, and financial modelling.
	
	<li>
	Lead financial due diligence for potential investments and acquisitions, partnering with Finance and Legal to support deal completion.
	
	<li>
	Support commercial negotiations with key partners by providing insight, challenge, and scenario analysis.
	
	<li>
	Identify growth opportunities within the existing event portfolio and model future event opportunities.
	
	<li>
	Deliver revenue and cost trend analysis, highlighting efficiencies and opportunities for improvement.
	
	<li>
	Work closely with senior leadership and cross-functional teams to ensure data-driven decision-making aligned to company objectives.
	
</ul>

 

Qualifications

<ul>
	<li>Strong analytical skills and ability to interpret and analyse data effectively
	<li>Knowledge and experience in commercial and financial analysis
	<li>Excellent communication and interpersonal skills
	<li>A commitment to outstanding customer service and stakeholder engagement
	<li>Proficiency in Microsoft Office, particularly Excel, and familiarity with data analysis tools
	<li>Ability to work collaboratively in a team and adapt to a hybrid working environment
</ul>

Commercial Analyst

E-Commerce Paid Search & Google Shopping Specialist 
 
Newton Aycliffe | Hybrid (1 day from home) 
? Full-time | Permanent 
? Competitive salary 
 
Join a fast-growing e-commerce business and take full ownership of high-impact paid media campaigns across Google, Paid Social and major online marketplaces. 
This is a hands-on performance role for a paid media expert who loves driving growth, scaling campaigns and delivering serious ROI in a fast-moving retail environment. 
 
What you’ll be doing:
<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Running and optimising PPC & Google Shopping campaigns
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Managing Paid Social across Meta, TikTok & YouTube
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Driving performance across Amazon, eBay, B&Q and more
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Owning budgets, testing strategies and scaling results
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Using data to continuously improve ROAS, CPA and conversions
</ul>
Experience 

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Strong hands-on Google Ads & Shopping experience
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Experience across Paid Social & marketplaces
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Experience in performance marketing (e-commerce or FMCG ideal)
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Proven track record of scaling campaigns profitably
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Confident with analytics, testing and optimisation
</ul>
Benefits 

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Career progression opportunities
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Competitive salary + annual bonus
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">22 days holiday + bank holidays + birthday off
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Staff discounts & salary sacrifice schemes
</ul>

E-commerce Paid Search and Google Shopping Specialist 

Jackson Hogg is delighted to be supporting a Northeast-based client in their search for an electrically biased maintenance technician. This opportunity is to join an established team supporting customers across the region and offer a career working in a vital sector. 
 
Overview 
We are seeking an experienced and qualified maintenance technician to join our team on a shift roster. The role involves maintaining and supporting a wide range of equipment and systems. This is a hands-on role requiring a blend of technical expertise, problem-solving ability, and the capacity to work independently to ensure service availability and reliability. 
 
Key Responsibilities 
 
<ul>
	<li>Perform incident resolution, maintenance, monitoring, and delivery of service requests, ensuring a high level of service provision at all times.
	<li>Lead the response during major incidents to ensure a fast resolution, minimising business impact; assist in investigations to determine and resolve root causes.
	<li>Identify and implement improvements to address recurring issues through the Problem Management process.
	<li>Monitor and record equipment reliability, availability, and performance, identifying trends and recommending improvements.
	<li>Ensure distributed services and configuration records adhere to operational standards, maintaining an up-to-date maintenance database.
	<li>Carry out configuration, testing, installation, and maintenance of software across supported systems.
	<li>Undertake proactive engineering and process development aimed at improving reliability, security, and resilience.
	<li>Deliver planned maintenance and repairs to agreed specifications and performance standards, ensuring materials and tools are available for scheduled work.
	<li>Assist in the development and maintenance of technical knowledge bases, user training materials, and operational documentation.
	<li>Document, review, and maintain processes, work instructions, and safe systems of work.
	<li>Support ICT project delivery by implementing technical changes and improvements.
	<li>Assist in the development and operation of availability and capacity management processes to reduce service outages.
	<li>Support ICT risk management processes, including business continuity, disaster recovery planning, and contingency testing.
	<li>Train and mentor colleagues in ICT policies, security requirements, and safe working practices.
	<li>Ensure all work complies with health and safety policies and procedures.
</ul>
 
Essential Requirements 
 
<ul>
	<li>Recognised apprenticeship and Level 3 qualification (or equivalent) in Electrical/Electronic Engineering.
	<li>Proven experience working with electrical installations and equipment.
	<li>Strong technical competence with distributed systems and endpoint devices.
	<li>Ability to work independently, prioritise tasks, and resolve issues under pressure.
	<li>A valid driving licence is essential – please note that without a valid driving license, you will not be considered for this role.
</ul>
 
Salary | Competitive with an excellent benefits package. 
Contract | Permanent

AFC Maintainer 

Contracts Officer

<h1>Senior Mechanical Engineer</h1>

Jackson Hogg is delighted to be recruiting for a Senior Mechanical Engineer to join a leading EPC engineering business in Cramlington. The business specialises in the design, engineering, and delivery of turbine systems and associated mechanical infrastructure for onshore energy and industrial facilities.

Key Responsibilities of the Senior Mechanical Engineer include, but are not limited to:

<ul>
	<li>
	Lead the design of turbine air intake and exhaust systems to meet industry standards, including BS EN 21789.
	
	<li>
	Perform calculations and simulations using Mathcad for material thickness, structural integrity, and thermal performance.
	
	<li>
	Create and review 2D/3D CAD models using Inventor and produce detailed drawings.
	
	<li>
	Review vendor documentation, technical datasheets, and provide guidance to ensure project compliance.
	
	<li>
	Support on-site inspections and liaise with construction teams.
	
	<li>
	Contribute to FEED studies, design reviews, and project reporting.
	
</ul>

Requirements of the Senior Mechanical Engineer:

<ul>
	<li>
	Degree in Mechanical Engineering (or equivalent) - Chartered status (IMechE) desirable.
	
	<li>
	Experience in turbine air intake and exhaust systems, preferably in EPC/onshore energy projects.
	
	<li>
	Proficient in Mathcad and 2D/3D CAD (Inventor).
	
	<li>
	Practical construction/inspection experience.
	
	<li>
	Ability to work independently and provide technical guidance.
	
	<li>
	Familiarity with relevant codes, standards, and best practices.
	
</ul>

This is an exciting opportunity for a Senior Mechanical Engineer to work on high-profile energy projects, delivering practical and innovative turbine designs. If this sounds like a role you're suitable for and you'd like to learn more about the exciting prospects of this role, we'd love to hear from you!

Please apply here or get in touch with Eleanor Buckley at Jackson Hogg to discuss further.

Senior Mechanical Engineer

Jackson Hogg Procurement division are partnering with an organisation in Sunderland on the appointment of a Technical Buyer to join their procurement team. This is a full-time and permanent opportunity and can offer a competitive salary and benefits package!

The Technical Buyer is responsible for ensuring goods and services are ordered and delivered on time, within budget and to the correct specification and quality requirements. The Technical Buyer is responsible for the entire procurement lifecycle, including interpretation of the requirements (scope), supplier selection (capability), contract & cost negotiation (terms), and ensuring the purchased item(s) or service(s) is delivered on time and to scope.

Benefits:

<ul>
	<li>Hybrid working - 3 days in office, 2 days WFH
	<li>Flexible working hours on a 37 hour week
	<li>Bonus scheme
	<li>Enhanced pension contribution
	<li>25 days holidays plus bank holidays
	<li>Early Friday finishes
</ul>

 

The Role:

<ul>
	<li>Technical interpretation of engineering drawings and specifications to determine efficient and cost effective RFQ sourcing
	<li>Review purchase specification requirements, identifying potential suppliers based on capability, reputation, quality, cost, and delivery performance.
	<li>Function as technical liaison between Project Engineer and Supplier to ensure RFQ detail is fit for purpose and meets scope requirements
	<li>Provide the necessary support and guidance to meet stakeholder and project requirements.
	<li>Ensure procurement processes conform with ISO 9001, 14001, 45001 frameworks
	<li>Collaborate closely with key stakeholders to ensure supplier payment terms, framework agreements, and/or unique agreements are negotiated and secured which de-risk and limit potential cost exposure through inferior quality or performance of services.
	<li>Provide feedback to the Project delivery team in a timely manner on plan v’s actual status, escalating any risks or concerns as required.
	<li>Review and respond effectively to demand forecasts, RFQs & PO placement, across multiple projects to ensure project and business demands are met to meet
	<li>Ensure Supplier queries are logged and responded to in an efficient manner to prevent delay or impact on schedule.
	<li>Control and manage all stock (on-site / off-site) maintaining accurate stock registers, controlling the allocation of stock assigned to projects, management of off-site storage suppliers and costs.
	<li>Assist the Bids team in maintaining accurate information across key suppliers - pricing, capacity, and availability to ensure accurate pricing at bid stage.
	<li>Maintain strong relationships across the existing supply chain, negotiating favorable terms which strengthen competitiveness, enhancing opportunities for project success.
	<li>Strategic sourcing - expand the current supply chain network, sourcing new suppliers, enhancing competitiveness.
	<li>Monitor, track and log socioeconomic impacts to raw materials and transport, considering availability, pricing, and lead times.
</ul>

 

The Person/Requirements:

<ul>
	<li>Understanding of technical specifications and requirements – with an ability to read/understand technical specifications and drawings - essential
	<li>Experience in sourcing complex engineered components, and manage commercial and technical requirements
	<li>CIPS qualified or working towards would be desirable but not essential
	<li>Extensive procurement experience in construction and/or fast-paced heavy engineering/process sectors
	<li>Experience of working to ISO 9001, 14001, 45001 requirements.
	<li>Demonstratable experience of creating and managing procurement delivery using KPIs.
	<li>Demonstratable experience of working in a fast paced project delivery setting.
	<li>Effective communication and negotiation skills, contracts, pricing, terms, and conditions including risk reduction and risk management
	<li>Relationship builder, collaborator, key supplier development experience
</ul>

For more information, please get in touch with Gemma Yeadon - Sector Lead | Procurement at Jackson Hogg Recruitment.

Technical Buyer

Location: Hitchin, Hertfordshire 
Type: Full-time, Permanent

A well-established UK manufacturer within the life safety sector, backed by a FTSE 100 parent company, is seeking an experienced Production Engineer to join its Production Engineering team.

This role will support day-to-day production, lead continuous improvement initiatives, and play a key role in the introduction of new products and processes into manufacturing.

<h3>Key Responsibilities</h3>

<ul>
	<li>
	Support manufacturing teams with hands-on technical problem solving
	
	<li>
	Investigate and resolve recurring quality, process, and downtime issues
	
	<li>
	Lead CI and structured problem-solving activities (RCA / 8D)
	
	<li>
	Support NPI activities and process introductions
	
	<li>
	Create and maintain SOPs, BOMs, and routings
	
	<li>
	Monitor and improve PCBA test performance and yield
	
	<li>
	Update test specifications, limits, and software
	
	<li>
	Liaise with PCBA suppliers and test equipment providers
	
	<li>
	Work closely with Quality and Supply Chain to ensure compliance
	
</ul>

<h3>Skills & Experience</h3>

<ul>
	<li>
	Manufacturing/Production Engineering background with strong electronics bias
	
	<li>
	Proven PCBA manufacturing experience
	
	<li>
	Good understanding of electronic test systems and data analysis
	
	<li>
	LabVIEW and TestStand experience highly desirable
	
	<li>
	Knowledge of WATS or similar tools beneficial
	
	<li>
	Experience managing change and leading CI activities
	
	<li>
	Strong communication and stakeholder management skills
	
	<li>
	Full UK driving licence
	
</ul>

Production Engineer

Sales Administrator, County Durham 
Salary: Negotiable depending on experience

Are you an organised and detail-oriented individual with a passion for customer service?  Jackson Hogg are delighted to be partnering with this progressive manufacturing company in their search for a Sales Administrator. This is a dynamic role offering the opportunity to work alongside a collaborative sales team and contribute to exceptional service delivery.

As a Sales Administrator, you will provide essential administrative support to the sales team, ensuring orders are processed efficiently, deliveries are well-coordinated, and customers receive top-notch service. You will be liaising with various departments, including external sales, dispatch, and logistics, to maintain the highest standards of customer care and operational efficiency.

Key Responsibilities will include (but not limited to):

<ul>
	<li>
	Customer Service: Serve as the first point of contact for customer enquiries via phone and email, providing clear information on product availability, order status, and delivery schedules.
	
	<li>
	Sales Administration: Manage inbound sales enquiries, process customer orders accurately, maintain records, and assist in preparing quotations and reports.
	
	<li>
	Logistics & Dispatch Coordination: Work closely with logistics teams to ensure timely and accurate deliveries, handling any transport-related queries.
	
	<li>
	Team Collaboration: Support both internal teams and external sales colleagues to ensure smooth order management and contribute to ongoing process improvements.
	
</ul>

Criteria: 

<ul>
	<li>Previous experience in sales administration, customer service, or a related office support role.
	<li>
	Strong attention to detail and excellent organisational skills.
	
	<li>
	Confident communicator with strong written and verbal communication skills.
	
	<li>
	Proficiency in Microsoft Office (Excel, Word, Outlook); experience with ERP or CRM systems is a plus.
	
	<li>
	A team player who is proactive and customer-focused.
	
</ul>

If you're looking to make an impact in a fast-paced, customer-focused environment and be part of a company with a strong track record of growth and success, we’d love to hear from you!

Sales Administrator

Jackson Hogg Procurement division are exclusively partnering with an organisation in Northumberland on the appointment of a Procurement Supervisor to join their close-knit team. 

This is a full-time and permanent role that will be based on site. Working hours can be flexible depending on preference between an 08.00-09.00 start time and 16.00-17.00 finish time Monday to Thursday. Early Friday finishes on offer. 

Salary on offer is £35k-40k depending on experience. 

 

The Role:

<ul>
	<li>Raise and place purchase orders on SAP
	<li>Attend supplier visits on site
	<li>Order for projects, site installations and support in maintaining the hire fleet
	<li>Management of 1 direct report in Logistics/Stores role
	<li>Negotiating with suppliers with a focus on cost-saving
	<li>Manage and update SAP system accordingly
	<li>Stock management
	<li>Liaise with manufacturers
	<li>Purchasing of consumables, small components, drives, cable, transport, tools and equipment
	<li>Liaise with administration team on smaller value items and stationery
	<li>Support project management team on project requirements
	<li>Monitor stock repurchasing
	<li>Support with import tasks as required
</ul>

The Person/Requirements:

<ul>
	<li>Ideally a minimum of 5 years' experience in a procurement/purchasing role
	<li>Comfortable working in a stand-alone procurement role
	<li>Strong negotiation skills
	<li>Good at building relationships with suppliers as well as internal/external stakeholders
</ul>

Benefits:

<ul>
	<li>21 days holiday, increasing 1 day per year for the first 5 years
	<li>Simply Health cash back plan
	<li>People's Pension
	<li>Cycle to Work scheme
</ul>

 

For more information, please get in touch with Gemma Yeadon - Sector Lead | Procurement at Jackson Hogg Recruitment.

Procurement Supervisor

Jackson Hogg Procurement division are pleased to be working with a growing manufacturing organisation in Stockton-on-Tees, on the appointment of a Purchasing Assistant to join their established Purchasing function.

This is a full-time and permanent role offering £28-30k depending on experience. This is an on-site role working a 37.5 hour week offering flexibility to start times.

Supporting the business on a growth trajectory, the Purchasing Assistant will play a key part in ensuring the timely and compliant procurement of materials and services required to support operations across the UK sites.

You will be responsible for supporting day-to-day purchasing activities, supplier administration and order management, while working closely with Operations, Engineering, Projects and Finance to ensure business requirements are met efficiently and accurately.

This is an excellent opportunity for an experienced purchasing or supply chain professional who enjoys working in a fast-paced manufacturing environment and contributing to continuous improvement.

 

Benefits:

<ul>
	<li>25 days holiday plus bank holidays
	<li>Purchase holiday scheme up to an additional 5 days
	<li>Enhanced pension contribution
	<li>New, modern office environment
</ul>

 

The Role:

<ul>
	<li>Issue RFQs and obtain quotations from approved suppliers in line with business requirements
	<li>Convert approved purchase requisitions into purchase orders in accordance with company procedures and approval limits
	<li>Support the submission and tracking of advance payment requests
	<li>Track and expedite purchase orders to ensure on-time delivery, escalating and communicating any significant changes to relevant stakeholders
	<li>Support the onboarding of new suppliers in line with company processes
	<li>Maintain accurate purchasing data and records, including supplier lead times and pricing information
	<li>Provide operational administrative support for assigned locations, including monitoring and replenishment of consumables across Operations and Engineering
	<li>Provide ad-hoc support with goods receipt and shipping activities via the company MRP system
	<li>Support Finance in resolving supplier invoice queries and discrepancies
	<li>Assist with budget tracking and cost-saving initiatives
	<li>Act as a point of contact for Operations, Projects and Engineering regarding the status of goods and services, advising on pricing, lead times and changes as required
	<li>Prepare purchasing reports and data for the management team
</ul>

The Person/Requirements:

<ul>
	<li>Ideally a minimum of 3 years’ experience in a purchasing, procurement or supply chain role
	<li>Experience working in a manufacturing or engineering environment is desirable
	<li>Proficient in Microsoft Word, Excel and PowerPoint
	<li>Strong organisational skills with the ability to manage multiple priorities
	<li>Confident communicator, able to work effectively with internal stakeholders and suppliers
	<li>Good negotiation skills and commercial awareness
	<li>Ability to work both independently and as part of a collaborative team
</ul>

 

For more information, please get in touch with Gemma Yeadon - Sector Lead | Procurement at Jackson Hogg Recruitment.

Purchasing Assistant

Jackson Hogg Procurement division are pleased to be partnering with a public sector organisation in Durham on the appointment of a Procurement Category Specialist to join their team. 

If you’re passionate about procurement and motivated by delivering meaningful social value, this role offers the chance to lead a diverse portfolio of procurement projects while developing your skills in a supportive and forward-thinking service.

The role of Procurement Category Specialist is a full-time and permanent role offering £40-45k depending on experience. 

 

Benefits include:

<ul>
	<li>Hybrid working - 3 days WFH and 2 days in office
	<li>Flexible working hours on a 37.5 hour week
	<li>27 days holiday + bank holidays rising to 32 days on length of service
	<li>Purchase holiday scheme of additional 10 days
	<li>Discounted gym membership
	<li>New, modern office environment
</ul>

The Role:

<ul>
	<li>Manage category spend across a range of goods, works, and services to secure high-quality contracts that deliver demonstrable value for money.
	<li>Provide professional procurement advice and support to service areas and partner organisations.
	<li>Lead on the development, implementation, and continuous improvement of the procurement strategy, policies, systems, and processes.
	<li>Deliver compliant, commercially effective procurement exercises in line with the Procurement Act 2023.
	<li>Work as part of a collaborative procurement team, reporting directly to the Procurement Manager 
</ul>

The Person/Requirements:

<ul>
	<li>This role is ideal for someone who is proactive, commercially aware, and committed to supporting strong governance, innovation, and social value outcomes.
	<li>5 years' experience in a Procurement role
	<li>Ideally CIPS qualified, working towards or willing to complete
</ul>

 

For more information, please get in touch with Gemma Yeadon - Sector Lead | Procurement at Jackson Hogg Recruitment.

Procurement Category Specialist x2

Jackson Hogg Procurement is delighted to be working in exclusive partnership with LifeSource Supplements in Ripon, North Yorkshire on the appointment of a Purchasing Assistant to support their ambitious growth plans for 2026.

LifeSource Supplements is a family-owned contract manufacturer operating since the mid-1990s, specialising in nutritional supplements including vitamins, minerals, powders, capsules, and tablets. The business supports a wide range of wellness brands, retailers, and organisations that outsource their supplement manufacturing.

As part of continued expansion, LifeSource is commissioning a brand-new packaging unit to significantly increase production capacity and support the next phase of growth.

This is a full-time and permanent role based on-site, offering a salary of up to £30k depending on experience. 

 

The Role:

<ul>
	<li>Raise, process, and track purchase orders in line with production requirements
	<li>Liaise with approved suppliers to confirm pricing, lead times, and delivery schedules
	<li>Monitor stock levels and support inventory control to avoid shortages or overstocking
	<li>Ensure all materials are delivered on time to meet production plans
	<li>Maintain accurate purchasing, supplier, and pricing records within ERP/MRP systems
	<li>Resolve delivery, invoice, or quality discrepancies in a timely manner
	<li>Support supplier performance reviews and assist with identifying cost-saving opportunities
	<li>Work closely with Production, Planning, Quality, and Warehouse teams
	<li>Ensure purchasing activity complies with company procedures and industry standards
</ul>

Benefits:

<ul>
	<li>Flexibility to working hours
	<li>Royal London pension
	<li>Holidays 24 days + bank holidays + birthday off + 1 day for dental/health appointments
	<li>Annual pay rises
	<li>Christmas bonus
</ul>

For more information, please get in touch with Gemma Yeadon - Sector Lead | Procurement at Jackson Hogg Recruitment.

We are recruiting for a biotechnology company advancing a novel therapeutic platform aimed at addressing previously hard-to-drug targets in serious diseases. The organisation is entering a growth phase and is now building out its business development function to support upcoming partnerships and pipeline expansion.

The Role

<ul>
	<li>Drive outward-facing business development activity to translate complex science into new partnerships
	<li>Develop high-impact BD presentations and maintain competitive landscape insights
	<li>Identify, engage, and nurture prospective global partners; represent the company at conferences and partnering events
	<li>Analyse deal structures, contract parameters, and partnering models
	<li>Evaluate R&D programs for scientific readiness, value, and partnering potential
	<li>Coordinate partner Q&A processes and work cross-functionally (incl. legal and IP) to close information gaps
	<li>Maintain internal BD tracking tools and coordinate with external advisors to move opportunities forward
</ul>

Who You Are

<ul>
	<li>Proactive, self-directed, and comfortable taking ownership of problem-solving
	<li>Strong communicator who can build rapport quickly across scientific and business audiences
	<li>Warm, thoughtful, and collaborative in how you engage with internal and external stakeholders
	<li>Able to translate scientific, contractual, or IP details into clear and persuasive narratives
	<li>Motivated by fast-moving environments and emerging opportunities
</ul>

Qualifications

<ul>
	<li>Experience in business development within biotechnology, pharmaceuticals, or a related life sciences sector
	<li>Strong understanding of drug development and intellectual property considerations
	<li>Experience with contract analysis and deal structuring
	<li>Excellent presentation and interpersonal communication skills
	<li>Willingness to travel for meetings and international events
</ul>

Business Development Manager

Group Reporting & Compliance Accountant 
Teesside 
 
An excellent opportunity has arisen for an experienced, technical Accountant who is seeking a new challenge in an exciting business. 
 
The ideal candidate will be responsible for month-close and consolidation processes, preparing financial statements, and ensuring compliance with accounting standards and regulations. 
 
Duties and Responsibilities include:
<ul>
	<li>Prepare balance sheet reconciliations, journals, and resolve discrepancies.
	<li>Produce statutory and group financial statements in line with IFRS and local GAAP.
	<li>Support monthly, quarterly, and annual reporting, including consolidation, FX, eliminations, and equity movements.
	<li>Maintain chart of accounts and master data governance.
	<li>Support budgeting, forecasting, and intercompany reconciliations.
	<li>Manage AR and AP ledgers.
	<li>Support the month-end close and implement controls to improve reporting efficiency.
	<li>Provide technical accounting support to management accounts and transactional teams.
	<li>Prepare and submit tax returns (VAT, corporate tax, etc.) and support corporation tax filings.
	<li>Act as the main contact for external accountants and auditors, coordinating and resolving audit queries.
	<li>Support internal and external audits across global entities.
	<li>???????Ensure compliance in stock, revenue, and cost-of-sales processes.
</ul>
As the ideal candidate you will be/have:

<ul>
	<li>Qualified accountant - ACA/ACCA/CIMA
	<li>3+ years experience in a financial accounting role.
	<li>Strong knowledge of accounting standards - IFRS, GAAP and relevant tax 
</ul>
 

<div style="margin-bottom: 8.0pt;margin-left: 0.0cm;margin-right: 0.0cm;margin-top: 0.0cm;"> </div>

Group Reporting & Compliance Accountant

<h3>Bid Manager – Energy Services</h3>

We are currently partnering with a leading international energy services business to recruit an experienced Bid Manager to support growth across oil, gas, and renewable energy projects.

This role has full responsibility for managing the end-to-end tendering process, acting as the central point of contact for bids and proposals. You’ll work closely with technical, commercial, and operational teams to deliver high-quality, competitive submissions while ensuring governance, deadlines, and approvals are met.

<hr>
<h4>Key Responsibilities</h4>

<ul>
	<li>
	Manage bids and tenders from opportunity identification through submission and post-tender review
	
	<li>
	Act as the main point of contact for all tender-related activity and client correspondence
	
	<li>
	Coordinate inputs from technical, commercial, sales, and operations teams
	
	<li>
	Write and produce PQQs, ITTs, sales documents, and presentations
	
	<li>
	Lead bid reviews, clarifications, approvals, and document sign-off
	
	<li>
	Allocate workload across the tendering team to meet deadlines
	
	<li>
	Maintain CRM records and bid library content
	
	<li>
	Support handover from contract award to project delivery
	
</ul>

<hr>
<h4>About You</h4>

<ul>
	<li>
	Minimum 3 years’ experience in a bid-focused role
	
	<li>
	Proven experience writing and managing bids in a complex business environment
	
	<li>
	Commercially aware, with experience in estimating or cost control
	
	<li>
	Strong written and verbal communication skills
	
	<li>
	Highly organised, adaptable, and comfortable managing multiple deadlines
	
</ul>

<hr>
<h4>What’s on Offer</h4>

<ul>
	<li>
	Competitive Salary
	
	<li>
	23 days annual leave (rising to 30) plus bank holidays
	
	<li>
	Private medical insurance and healthcare cash plan
	
	<li>
	Employee rewards and benefits platform
	
	<li>
	Competitive pension scheme
	
</ul>

Bid Manager

Production Manager 
 
The client is at the forefront of heavy engineering and large-scale manufacturing for the offshore wind industry. As part of our continued growth, we’re looking for a Production Manager to help drive&nbsp;operational excellence and innovation across our advanced manufacturing operations. 
 
We are seeking an experienced and driven Production Manager to lead our manufacturing operations. To be successful, you will have a proven track record of operational leadership gained in a heavy welding and fabrication environment and ideally have an excellent knowledge of offshore wind, large structural assemblies, roll or press bending, and SAW welding also sub arc experience. 
 
As Production Manager, you will focus on increasing plant output and productivity by implementing strategies that reduce non-productive time, optimise labour utilisation, and minimise manufacturing costs. You will assess staffing levels and skill gaps, working closely with HR to develop capability plans that support both current and future production demands. A key part of the role will be establishing robust production management processes and monitoring performance through clearly defined KPIs, including yield, defect rates, operational efficiency, and processing cost per ton. 
 
This role is responsible for planning and controlling all production schedules and labour resources to consistently meet customer requirements for delivery, quality, and cost. You will ensure daily production operations are executed in line with project timelines and budgets while actively driving continuous improvement across the plant. 
 
You will have full accountability for SOP compliance, accurate production data, task management, and quality system management in line with ISO 9001:2015 standards. Close collaboration with the wider operational teams such as quality, maintenance, logistics, sales, and project management will be essential to track production output, project progress, quality performance, and delivery targets. 
 
HSE leadership is critical to this role. You will ensure full compliance with all HSE regulations, conduct risk assessments and implement safe systems of work, enforce PPE requirements, and lead regular HSE training across the facility. 
 
The successful candidate will bring substantial experience in a senior production or manufacturing management role, with hands-on fabrication experience within heavy engineering as an essential requirement. Experience within large-scale manufacturing operations, particularly in steel or pipe fabrication, will be a strong advantage along with continuous improvement experience. 
 
&nbsp;

Production Manager

Inteirm role to support with year end  
Need someone with extensive and complex reconciliation experience to look into the B/sheet - Payroll, Fixed Assets and VAT. 
Need someone who can dig into the system  
Short term role - 3 months 
 
They are unsure of the size of the task - need someone to come in, with minimal hand holding and crack on.

Interim Financial Accountant

The Head of Service Operations will hold end-to-end accountability for the performance and stability of operational services, spanning IT, Operational Technology, Applications and Telecommunications. The role is responsible for ensuring services are resilient, compliant and customer-focused, while supporting the organisation’s wider strategic ambitions. 
 
This position will champion service excellence, embedding robust operational practices, strengthening processes and improving service reliability to support regulatory compliance and business outcomes. 
 
Key Responsibilities 
Strategic Direction and Leadership: 
• Set the long-term direction for Service Operations, ensuring alignment with organisational priorities and regulatory frameworks. 
• Provide senior leadership to IT, OT, Telecommunications and Application teams, ensuring effective delivery against agreed service, cost, safety and quality measures. 
• Design and maintain governance arrangements that drive performance management, assurance and continuous improvement. 
 
Operational Technology and Telecommunications Oversight: 
• Ensure effective operation and support of OT environments, including critical systems that enable network control and automation. 
• Take accountability for telecommunications services across operational and corporate networks, maintaining high levels of availability and resilience. 
 
Regulatory, Compliance and Stakeholder Engagement: 
• Act as a senior operational representative with regulators, industry bodies and external stakeholders on service-related matters. 
• Collaborate closely with internal functions and third-party partners to deliver integrated, end-to-end service outcomes. 
 
Risk, Resilience and Resource Management: 
• Manage the Service Operations financial portfolio, ensuring strong cost control and value for money. 
• Lead resilience planning, incident response and continuity activities to reduce operational risk and protect critical services. 
 
Key Competencies 
• Strong leadership capability with experience running complex, large-scale technology operations. 
• Confident and credible communicator, able to influence at senior leadership and executive level. 
• Experience overseeing high-value technology contracts and supplier relationships. 
• Comprehensive understanding of IT services, OT environments, telecommunications and application support. 
 
Skills, Knowledge & Qualifications 
Essential Experience and Qualifications: 
• Significant experience in senior service operations roles within utilities, energy, or other large, mission-critical technology environments. 
• Demonstrated experience leading operational change, transformation and governance within agile or hybrid delivery models. 
• Strong financial and commercial management skills, including accountability for multi-million-pound budgets. 
• Proven ability to manage and influence senior stakeholders, including regulators and executive leadership. 
• Full UK driving licence.

Head of Service Operations 

FGDS Application Specialist 
Midlands 
Salary: up to £65,000 + benefits 
 
Jackson Hogg is delighted to be working with an international leader in medical and safety technology in appointing an FGDS Application Specialist to be based in Midlands. The primary focus of the FGDS Application Specialist role will be within the safety business areas and is a field-based role. 
 
FGDS Application Specialist Key Responsibilities: 
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">To provide Key FGDS pre- and post-sales support as defined within the FGDS Sales Process and Overarching Project delivery process.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Pre-Sales Support responsibility is defined from the pre-sales phase to ensure a fully designed and compliant solution meets the customer’s needs and solves the customers problems they have for their FGDS requirement.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Post-Sales Support will be in the form of ensuring delivered solution meets customer requirement is complete to a high standard and is ultimately what was required at point of pre-sales agreement.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintain project works and plans in accordance with multisite processes.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ensure all relevant technical standards and specifications are adhered to for full technical compliance without supervision outside of departmental guidelines.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Responsible for ensuring high levels of engineering quality throughout the pre- and post-sales processes through to customer acceptance.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Demonstrate technical competence and expertise for any associated 3rd party equipment working with FGDS full portfolio.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Supports project delivery by working in alignment with project managers, following established Project Governance and project management methodologies. Ensures that project-related activities and plans comply with multisite processes and standards.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Provide level 2 technical support as required to sales and service teams.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Involved in the sales cycle from early quote stage.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Advises sales about the technical and commercial specification.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Offer pricing and discount guidance to Sales Team where applicable.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Perform Factory Acceptance Testing and Site Acceptance Testing (with customer if required)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Fault finding, testing and detailed engineering reports for products and manufactured systems down to component level.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Conducting customer site surveys both onshore and offshore and ensuring compliance to any relevant standards and specifications
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Provide installation or commissioning support on all projects.
</ul>
Reporting Relationships 
Manager - Head of System Centre Operations (FGDS) 
Size of team/environment - Working in a team of 7 FGDS Application Specialists supported by a dedicated Systems Design Engineering Team, you will be supported by various functions throughout the team such as Service, Product Specialist, Document Control, Marketing, Project Management, Sales, Commercial etc. 
 
FGDS Application Specialist Key Requirements: 
Education/Qualifications

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Completion of a modern apprenticeship in Instrumentation, Electrical or related field.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Bachelor’s degree / HNC / HND in Instrumentation, Electrical or similar discipline.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Professionally registered with the Engineering Council (IEng or CEng), or actively working towards registration through an appropriate Professional Engineering Institution (PEI), such as the InstMC, IET, or similar.
</ul>
Related Experience 

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">3+ years experience in fixed fire & gas detection systems or related industries
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proven background in instrumentation & control engineering or related field
</ul>
This is a permanent, remote role with frequent travelling around Midlands. 
 
If you are interested in this role please get in touch with Eleni at 07455158839 or submit your CV at eleni.avgenaki@jacksonhogg.com.

FGDS Application Specialist (Midlands) 

Senior Java Developer 
 
Initial 3-month contract starting ASAP  
 Tech stack/skills required:  
<ul>
	<li style="margin: 0.0cm;">Java specialist 
	<li style="margin: 0.0cm;">Prior gov experience will be prioritised 
	<li style="margin: 0.0cm;">Java 21+, Spring 3 
	<li style="margin: 0.0cm;">NodeJS 
	<li style="margin: 0.0cm;">CI/CD pipelines (GitLab CI) 
	<li style="margin: 0.0cm;">MongoDB (NoSQL) 
	<li style="margin: 0.0cm;">TDD and Unit Testing 
	<li style="margin: 0.0cm;">AWS Cloud Technologies 
	<li style="margin: 0.0cm;">Microservice architecture 
	<li style="margin: 0.0cm;">Apache Kafka 
	<li style="margin: 0.0cm;">Docker/Containerisation 
	<li style="margin: 0.0cm;">Git 
	<li style="margin: 0.0cm;">Available to interview and start at short notice 
</ul>
  
  
Project overview: The team works in Agile, using Scrum and Kanban, and delivers in two-week sprints. The service is currently in the Public Beta phase. The Full Stack Developer will join a cross-functional scrum team to support ongoing build activity and help meet delivery timelines. The role is critical to ensuring the team can continue to deliver high-quality, accessible digital services to users.

Senior Java Developer

<h1>Electrical Design Draughtsperson</h1>

Overview

<ul>
	<li>
	Undertake and check detailed design and preparation of electrical and instrumentation engineering deliverables for new and existing products, including electrical schematics, PLC equipment, and control panel layouts.
	
	<li>
	Assist senior engineers with the preparation of outline design schemes.
	
	<li>
	Produce electrical schematics, general arrangement drawings, and supporting documentation under the direction of engineers.
	
	<li>
	Assist with the checking of documents and carry out detailed calculations.
	
	<li>
	Understand and interpret detailed electrical, hydraulic, process, and instrumentation drawings.
	
	<li>
	Plan, control, and undertake day-to-day electrical engineering tasks using Autodesk AutoCAD 2D software.
	
	<li>
	Assist with the execution of contracts to supply equipment or services.
	
	<li>
	Liaise with colleagues to ensure all electrical and instrumentation project deliverables required under contract are delivered in accordance with the project schedule.
	
</ul>

Required Qualifications, Training & Skills

Essential

<ul>
	<li>
	Level 4 HNC in Electrical Engineering (or similar/higher qualification).
	
	<li>
	1–2 years’ experience in an electrical design role.
	
	<li>
	Proficient in Microsoft Excel.
	
	<li>
	Previous experience using CAD software (AutoCAD 2D).
	
	<li>
	Self-motivated, proactive, and willing to adapt to change while progressing projects.
	
</ul>

Desirable

<ul>
	<li>
	Previous experience with onshore or offshore marine equipment.
	
	<li>
	Experience using Autodesk Inventor to review layouts and provide feedback on installation equipment positioning.
	
</ul>

General Responsibilities

<ul>
	<li>
	Work collaboratively with colleagues to ensure company objectives are achieved.
	
	<li>
	Comply with the Business Management System (BMS) and contribute to its continual improvement and effectiveness.
	
	<li>
	Report any HSE risks or incidents to promote the health, safety, and well-being of yourself and others.
	
	<li>
	Work towards standardisation across both existing and new products.
	
</ul>

Electrical Design Draughtsperson

Customer Service Executive, Tyne and Wear 
Salary: Up to £32,000 depending on experience 
 
Jackson Hogg is delighted to be supporting this growing FMCG client in their search for an experienced Customer Service Executive. The successful candidate will be responsible for managing the end-to-end order process and delivering excellent customer service across the UK and Europe, working closely with sales, marketing, warehouses, and logistics partners. 
Key responsibilities will include (but not limited to):
<ul>
	<li style="margin-right: 0.0cm;">Be the go-to person for customer questions, solving issues and escalating anything urgent
	<li style="margin-right: 0.0cm;">Act as the main link between customers, warehouses, and logistics partners
	<li style="margin-right: 0.0cm;">Look after sales orders from start to finish, including invoicing and fulfilment in NetSuite
	<li style="margin-right: 0.0cm;">Organise shipments, handle shipping paperwork, and keep an eye on deliveries
	<li style="margin-right: 0.0cm;">Raise invoices and credit notes accurately and on time
	<li style="margin-right: 0.0cm;">Sort out warehouse issues and help keep deliveries running smoothly
	<li style="margin-right: 0.0cm;">Keep customer details up to date, reconcile accounts, and chase overdue payments when needed
	<li style="margin-right: 0.0cm;">Support export customers and pitch in with the wider team during busy times
</ul>
Criteria: 

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;margin-right: 0.0cm;">Previous experience in customer service with handson order processing and invoicing
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;margin-right: 0.0cm;">Experience working alongside logistics providers or warehouses
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;margin-right: 0.0cm;">Highly organised with great attention to detail and able to juggle multiple tasks
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;margin-right: 0.0cm;">Comfortable working in a fastmoving, ever-changing environment
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;margin-right: 0.0cm;">Familiarity with NetSuite is ideal but not essential
</ul>

Customer Service Executive

Senior Marketing Executive (B2B) 
Pudsey 
£30-35k 
Office Based

Are you a senior marketing exec who still loves the hands-on elements? 
Multi-faceted. Commercial. Digitally fluent. 
We’re recruiting for a long established B2B manufacturer based in Leeds to appoint a Senior Marketing Executive into a key role reporting to the Head of Marketing, with genuine potential to progress as the function continues to evolve. 
This is for someone who enjoys operating at both strategic and delivery level - shaping plans, running campaigns and working closely with sales to drive growth across multiple business divisions.

The role in brief:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Develop and deliver B2B marketing strategy across assigned divisions
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Run multi-channel campaigns across digital, email, print, events and social
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Create content for websites, case studies, blogs, awards and sales collateral
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Act as Brand Guardian and manage agency relationships
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Own social channels, websites (WordPress), SEO and email campaigns
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Support exhibitions and industry events
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Track performance and provide insight through analytics tools
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Work closely with sales and internal stakeholders
</ul>
I’m looking for:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Proven B2B marketing experience (ideally 3+ years)
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Comfortable working across multiple brands
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Strong copywriting and communication skills
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Hands-on with Adobe Creative Suite and WordPress
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Experience running social campaigns
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Commercial, organised and data-driven
</ul>
If you’re open to a discreet conversation about a senior-level marketing role with scope, visibility and progression, drop me a message.

Senior Marketing Executive

Business Development Manager 
 
We are currently partnering with a specialist road marking and highways contractor as they enter a phase of regional expansion and depot growth across the UK.

The business operates across road lining, thermoplastics, and specialist removal services, supplying a predominantly public sector customer base alongside a growing commercial portfolio. With strong technical capability and long-term customer relationships, this is an opportunity to play a key role in shaping the next stage of growth.

This role will focus on developing new business opportunities across services and regions, managing long sales cycles, and positioning the business as a trusted delivery partner within the highways and infrastructure market.

Key Responsibilities

<ul>
	<li>
	Develop and manage a pipeline of new business across lining and thermoplastics
	
	<li>
	Grow commercial sector activity alongside existing public sector frameworks
	
	<li>
	Engage with a wide range of stakeholders, including procurement and technical decision-makers
	
	<li>
	Support tenders, frameworks, and regional expansion opportunities
	
	<li>
	Promote specialist and environmentally responsible service offerings
	
	<li>
	Maintain accurate CRM, quoting, and customer records
	
</ul>

About You

<ul>
	<li>
	Proven experience in Business Development or Sales within highways, construction, or infrastructure
	
	<li>
	Comfortable managing long and complex sales cycles
	
	<li>
	Experience working with public sector and commercial customers
	
	<li>
	Strong communication skills with a commercially astute approach
	
	<li>
	Adaptable and comfortable operating within a growing, evolving business
	
</ul>

What’s on Offer

<ul>
	<li>
	Opportunity to shape regional growth and expansion
	
	<li>
	Broad, varied role across multiple services
	
	<li>
	Clear long-term progression as the business continues to grow
	
</ul>

Business Development Manager 

Community Associate

Business Development Manager – Manufacturing 
 
We are currently partnering with a well-established UK manufacturing business in their search for an experienced and commercially driven Business Development Manager to support continued growth.

The business operates as an end-to-end manufacturing partner, delivering low- to high-volume tooling and specialist injection moulding solutions across a range of sectors.

This role will focus on outbound new business development, managing the full sales cycle, and building long-term customer relationships while contributing to wider commercial growth.

Key Responsibilities

<ul>
	<li>
	Identify and secure new business through outbound sales activity
	
	<li>
	Develop and grow the client portfolio
	
	<li>
	Manage the full end-to-end sales cycle
	
	<li>
	Build long-term customer relationships
	
	<li>
	Maintain accurate pipeline reporting
	
</ul>

About You

<ul>
	<li>
	Proven experience in Business Development or Sales
	
	<li>
	Background in manufacturing, engineering, plastics, or similar
	
	<li>
	Strong outbound sales and negotiation skills
	
	<li>
	Comfortable working autonomously
	
</ul>

What’s on Offer

<ul>
	<li>
	Competitive salary
	
	<li>
	High level of autonomy
	
	<li>
	Clear progression within a growing business
	
</ul>

Operational Management 
<ul>
	<li>Ensure that all products are manufactured in accordance with customer specifications and delivered on time through the efficient use of labour and resources.
	<li>Monitor and manage all cost centre budgets under your remit, including production activities such as stock levels, material usage and control, waste management, and productivity.
	<li>Lead Lean Manufacturing initiatives and continuous improvement programs, including one piece flow, Kaizen, target costing, Kanban, 6S, and process analysis.
	<li>Collaborate closely with the Quality, R&D, and Production Engineering departments to ensure processes operate at optimum efficiency, continuously seeking to improve methods, procedures, and operations within your area of responsibility.
	<li>Take ownership of and maintain all Cost of Poor Quality (COPQ) activities.
	<li>Maintain and manage production-related computer systems to ensure accurate reporting and data provision for internal and external stakeholders.
	<li>Ensure that Manufacturing maintains its Quality Assurance accreditations by complying with all quality and company procedures, standards, and manuals, while always promoting continuous improvement.
	<li>Ensure effective resource allocation and utilisation in line with agreed budgetary targets and business needs, in compliance with all relevant policies and procedures.
</ul>
 
Leadership & People Management

<ul>
	<li>Lead, motivate, and support Production Supervisors and operational staff to achieve departmental goals.
	<li>Partner with the HR Department to identify and address staff training and development needs through the company’s performance review process.
	<li>Ensure all employment relations policies and procedures are implemented and adhered to.
	<li>Oversee the day-to-day management of production staff, fostering a culture of accountability, teamwork, and engagement.
	<li>In collaboration with HR, recruit and onboard production staff (including temporary personnel) in line with operational requirements.
	<li>Demonstrate a pragmatic, hands-on leadership style, maintaining a visible presence on the production floor.
</ul>
Health & Safety 

<ul>
	<li>Ensure full compliance with all Health & Safety (H&S) regulations and practices to safeguard employees, visitors, and contractors.
	<li>Work closely with the H&S Manager to support risk assessments, accident investigations, and reporting procedures
</ul>

<h2>Contract Manager – Scotland</h2>

We are currently partnering with an established UK contractor within road marking and highway maintenance in their search for an experienced Contracts Manager to lead operations across Central Scotland.

This role has full responsibility for the operational and commercial performance of existing local authority contracts, while also playing a key role in growing the regional operation. You’ll manage site teams, act as the main client contact, support recruitment, and help establish a central operational base as the business expands.

<h3>Key Responsibilities</h3>

<ul>
	<li>
	Manage operational and commercial delivery of regional contracts
	
	<li>
	Act as primary client and stakeholder contact
	
	<li>
	Lead, develop, and grow site teams
	
	<li>
	Plan works and ensure compliance with H&S and quality standards
	
	<li>
	Manage budgets, reporting, and support regional growth
	
</ul>

<h3>About You</h3>

<ul>
	<li>
	Background in road lining, road marking, or traffic management
	
	<li>
	Experience managing highway or local authority contracts
	
	<li>
	Commercially aware, self-motivated, and comfortable working autonomously
	
	<li>
	Strong leadership and communication skills
	
</ul>

<h3>What’s on Offer</h3>

<ul>
	<li>
	Competitive salary + vehicle & benefits
	
	<li>
	High level of autonomy
	
	<li>
	Clear progression to senior leadership / regional role
	
</ul>

<h3>Multi-Discipline Inspector</h3>

Location:&nbsp;North East &amp; North West&nbsp; 
Sectors: Chemicals, Pharmaceuticals, Oil &amp; Gas, Food, Bulk Storage &amp; Distribution, Renewables &amp; Energy

Jackson Hogg is supporting a growing engineering services organisation in the appointment of a Multi-Discipline Inspector. This is a regional role&nbsp;offering exposure to a broad client base across high-hazard and regulated industries, focused on asset integrity, safety, and compliance.

You will operate at the forefront of client delivery, inspecting in-service equipment, producing high-quality technical reports, and acting as a trusted technical interface between site teams and internal engineering disciplines.

<hr />
<h3>The Role</h3>

<ul>
	<li>
	Inspection of pressure vessels, pipework, storage tanks and associated process equipment
	</li>
	<li>
	Acting as the primary inspection contact for designated client sites
	</li>
	<li>
	Assessing equipment condition and providing clear technical recommendations
	</li>
	<li>
	Creating and amending Written Schemes of Examination (WSE)
	</li>
	<li>
	Producing and issuing inspection Reports

	<ul>
	</ul>
	</li>
	<li>
	Supplementary Inspection Reports
	</li>
	<li>
	Imminent Failure / Danger Notification Forms
	</li>
	<li>
	Movement Reports
	</li>
</ul>

<ul>
	<li>
	Supporting clients with remedial work, repairs, maintenance and modification strategies
	</li>
	<li>
	Promoting a joined-up, multi-discipline engineering approach across inspection, materials and mechanical services

	<hr />
	<h3>Background &amp; Experience</h3>

	<ul>
		<li>
		Proven experience working within an Inspection role
		</li>
		<li>
		Qualified to recognised inspection standards (API and/or EEMUA essential)
		</li>
		<li>
		Experience within petrochemical, process plant or heavy engineering environments
		</li>
		<li>
		Strong background across multiple disciplines:

		<ul>
		</ul>
		</li>
		<li>
		Piping
		</li>
		<li>
		Pressure Vessels
		</li>
		<li>
		Storage Tanks
		</li>
		<li>
		Relief Systems
		</li>
	</ul>
	</li>
	<li>
	Confident working independently across multiple sites
	</li>
	<li>
	High standard of technical report writing with strong attention to detail
	</li>
	<li>
	Experience defining inspection intervals in line with approved codes and WSEs

	<hr />
	<h3>Key Competencies</h3>

	<ul>
		<li>
		API-570 (Piping), API-510 (Pressure Vessels), API-653 / EEMUA 159 (Tanks)
		</li>
		<li>
		Desirable:

		<ul>
		</ul>
		</li>
		<li>
		API-580 Risk Based Inspection
		</li>
		<li>
		PCN Level 2 (UT, Eddy Current)
		</li>
		<li>
		CSWIP 3.0 / 3.1
		</li>
	</ul>
	</li>
	<li>
	Full UK Driving Licence
	</li>
	<li>
	Strong client-facing and communication skills
	</li>
	<li>
	Organised, adaptable and able to meet deadlines
	</li>
	<li>
	Ability to coach and mentor junior inspectors

	<hr />
	<h3>Why Apply</h3>

	<ul>
		<li>
		UK-wide, technically varied role across high-profile industrial sectors
		</li>
		<li>
		Long-term opportunity within a growing engineering services environment
		</li>
		<li>
		Strong focus on safety, asset integrity and best practice inspection
		</li>
		<li>
		Opportunity to work autonomously while being supported by a wider technical team
		</li>
	</ul>
	</li>
</ul>

Multi Discipline Inspector

Job Description:

Overview 
Jackson Hogg are delighted to be working with an exciting, growing business in Newcastle looking to add a Commercial Finance Business Partner into their establish finance function.

This role is highly stakeholder-facing, working closely with senior leaders across the organisation to support budgeting and forecasting, provide clear financial insight, and influence decision-making to improve business performance.

Key points:

<ul>
	<li>Commercial Finance Business Partner role supporting senior stakeholders
	<li>Strong focus on budgeting, forecasting and financial modelling
	<li>Advanced Excel skills essential
	<li>Qualified accountant (ACA / ACCA / CIMA)
	<li>Confident working with non-finance teams; able to influence and challenge
</ul>

Finance Business Partner 

People & Culture Assistant (Dutch Speaking), Newcastle 
Salary negotiable depending on experience 
We’re delighted to be partnering with this forward thinking professional services firm in their search for a People & Culture Assistant to join their team. This is a fantastic opportunity to build HR experience in a fast-paced, international environment. Fluency in both Dutch and English is required. 
Key Responsibilities:
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Act as the first point of contact for day-to-day HR queries
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Manage employee lifecycle activities (onboarding, offboarding, promotions, absence management)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Support HR processes such as engagement surveys, talent reviews, and salary reviews
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Coordinate recruitment for student and junior roles, including interviews, offers, and communications
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Contribute to People & Culture projects and internal communications
</ul>
Skills & Experience:

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Fluency in Dutch and English (both spoken and written)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Knowledge of Dutch Employment Laws
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong communication, organisational, and relational skills
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proficient in HR systems (e.g., Workday, ADP, Microsoft Office)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Highly proactive, with excellent attention to detail and cultural sensitivity
</ul>
This is an exciting opportunity for someone eager to develop in HR within a global, collaborative environment.

People and Culture Assistant (Dutch speaking)

My client is seeking an experienced Digital Content Manager to take ownership of digital content and communications across multiple channels.

This role is responsible for creating engaging, brand-aligned content that drives business growth, strengthens brand visibility, and expands reach across key markets. The successful candidate will combine strong copywriting skills with strategic thinking and hands-on execution.

Key Responsibilities

<ul>
	<li>
	Support the development of a digital content strategy aligned with business and marketing objectives
	
	<li>
	Create, edit, and publish content including blogs, news, case studies, PR, advertorials, video, and campaign assets
	
	<li>
	Manage website content and CMS functionality
	
	<li>
	Ensure all content is SEO-optimised and aligned with brand guidelines
	
	<li>
	Collaborate with internal teams to identify content opportunities and improve user experience
	
	<li>
	Edit and proofread content to ensure quality, consistency, and accuracy
	
	<li>
	Manage content calendars, workflows, and deadlines
	
	<li>
	Measure, analyse, and report on campaign performance, KPIs, and ROI
	
	<li>
	Manage content distribution across digital channels to increase traffic and engagement
	
	<li>
	Liaise with external agencies and suppliers
	
	<li>
	Support PR activity, including media statements and sensitive communications
	
	<li>
	Project manage key digital publications and annual reviews
	
</ul>

Skills & Experience Required

<ul>
	<li>
	Proven experience in a digital marketing or content-focused role
	
	<li>
	Degree in Marketing or a related field
	
	<li>
	Strong copywriting, editing, and proofreading skills
	
	<li>
	Demonstrable experience with SEO and website management
	
	<li>
	PR writing experience (essential)
	
	<li>
	Experience managing multiple stakeholders and content contributors
	
	<li>
	Strong organisational and project management skills
	
	<li>
	Ability to work to tight deadlines in a fast-paced environment
	
</ul>

Desirable:

<ul>
	<li>
	Experience with Adobe Creative Suite, Canva
	
	<li>
	Familiarity with LinkedIn, YouTube, and Instagram
	
</ul>

Digital Content Manager

HR Manager

Job Title 
Production Operative / Packer 
Location 
Ripon, North Yorkshire 
Salary 
£26,000 – £28,000 per annum, dependent on experience (DOE) 
Hours of Work
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Day shift, Monday to Friday
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Flexible start times between 2:00am and 8:00am
	<li style="margin: 0.0cm 0.0cm 8.0pt;">8.5-hour shifts
</ul>
Overview 
Our client is a growing and expanding manufacturing business based in Ripon. Due to increased production demand, they are looking to recruit a Production Operative / Packer to support day-to-day manufacturing and packing operations. This role is well suited to individuals with previous factory, warehouse, or production experience who are comfortable with manual handling and working in a fast-paced environment. 
Key Responsibilities

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Packing finished products in line with company standards and specifications
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Manual handling and heavy lifting as part of daily production activities
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Operating basic production equipment where required
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Palletising goods and preparing products for dispatch
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carrying out visual quality checks to ensure product consistency
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintaining a clean and safe working environment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Following all health & safety procedures and manual handling guidelines
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Supporting general production tasks as required across the site
</ul>
Candidate Requirements

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Previous experience in a production, packing, warehouse, or manufacturing environment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Physically fit and able to carry out regular heavy lifting
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Good attention to detail and ability to follow instructions
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Reliable, punctual, and able to work to production targets
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Flexible approach to start times within the stated shift window
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong work ethic and team-focused attitude
</ul>
Desirable (but not essential)

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience with pallet trucks or basic warehouse equipment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Previous work in high-volume production or packing environments
</ul>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Competitive salary of £26,000 – £28,000 DOE
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Monday to Friday day shift with flexible start times
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Opportunity to join a growing and stable business
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Consistent hours and long-term employment prospects
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Supportive team environment
</ul>

Production Operative

Job Title 
Experienced Production Operative 
Location 
Ripon, North Yorkshire 
Salary 
£30,000 – £34,000 per annum, dependent on experience (DOE) 
Hours of Work
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Day shift, Monday to Friday
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Flexible start times between 2:00am and 8:00am
	<li style="margin: 0.0cm 0.0cm 8.0pt;">8.5-hour shifts
</ul>
Overview 
Our client is a well-established and expanding manufacturing business based in Ripon. Due to continued growth and increased production demand, they are looking to recruit an experienced Production Operative to support their ongoing expansion. This is a hands-on role requiring solid production experience alongside the ability to assist with the maintenance and upkeep of production machinery. The successful candidate will become a key part of a growing operation offering long-term stability and progression. 
Key Responsibilities

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Operate production machinery in line with company procedures and production schedules
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Assist with routine maintenance, basic fault finding, and first-line repairs on production equipment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Carry out machine changeovers, setups, and adjustments as required
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Monitor machine performance and report defects, breakdowns, or safety concerns
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ensure products meet quality standards and production targets
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintain accurate production and maintenance records where required
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Comply with all health & safety procedures and housekeeping standards
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Support continuous improvement initiatives
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Work closely with production, maintenance, and supervisory teams
</ul>
Candidate Requirements

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proven experience as a Production Operative within a manufacturing or industrial environment
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience assisting with machine maintenance, servicing, or mechanical adjustments
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong mechanical awareness and practical problem-solving ability
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ability to work independently and show initiative
	<li style="margin: 0.0cm 0.0cm 8.0pt;">High attention to detail and commitment to quality
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Flexibility to start between 2:00am and 8:00am
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Reliable, punctual, and safety-focused approach
</ul>
Desirable (but not essential)

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Mechanical or engineering qualifications
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience with automated or semi-automated production machinery
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Knowledge of lean manufacturing or continuous improvement methods
</ul>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Competitive salary of £30,000 – £34,000 DOE
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Monday to Friday day shift pattern
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Flexible start times
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Opportunity to join a growing and expanding business
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Long-term, stable employment with development opportunities
</ul>

Experienced Production Operative

Electronics Product Support Engineer

North Yorkshire 

Salary: up to £45,000 plus benefits

Jackson Hogg is delighted to be working with a market-leading engineering manufacturer to bring an Electronics Product Support Engineer to support electronic products through their full lifecycle. This role has a focus on component obsolescence management, design updates, compliance and production support.

This role is ideal for an electronics engineer with experience in electrical schematics, PCB layouts, BOMs, EMC testing and manufacturing support, who enjoys solving time-critical technical issues and keeping products compliant and in production.

Electronic Product Support Engineer Key Responsibilities

<ul>
	<li>
	Manage electronic component obsolescence, identifying and qualifying alternative components
	
	<li>
	Implement design changes to schematics, PCB layouts and BOMs
	
	<li>
	Ensure all design updates maintain product performance, safety and certification
	
	<li>
	Coordinate verification and validation testing, including EMC, optical, environmental and electrical safety testing
	
	<li>
	Review and maintain electrical and electronic schematics and production documentation
	
	<li>
	Provide engineering support to manufacturing, ensuring uninterrupted product production
	
	<li>
	Support products in manufacture and in the field, including occasional site visits
	
	<li>
	Maintain accurate engineering change control and quality records
	
	<li>
	Manage multiple technical issues concurrently in a fast-paced production environment
	
</ul>

Electronic Product Support Engineer Key Requirements:

<ul>
	<li>BEng in Electronics Engineering, or HNC/HND with relevant industry experience
	<li>
	Proven experience in a product-focused electronics engineering role
	
	<li>
	Strong understanding of electronic communications, including:

	<ul>
		<li>
		RS485, RS232
		
		<li>
		SPI, I3C
		
		<li>
		Ethernet, CAN bus, WiFi
		
	</ul>
	
	<li>
	Experience working with schematics, PCB layouts, BOMs and ECNs
	
	<li>
	Hands-on experience using electronic test equipment (oscilloscopes, logic analysers, frequency counters)
	
	<li>
	Understanding of EMC, electrical safety and environmental compliance
	
	<li>
	Ability to read and interpret 2D and 3D mechanical drawings
	
	<li>
	Confident communicator, comfortable working with manufacturing, suppliers, contractors and customers
	
	<li>
	Experience supporting products already in production or fielded
	
</ul>

Benefits

<ul>
	<li>
	Competitive salary and comprehensive benefits package
	
	<li>
	25 days holiday (excluding bank holidays) + option to purchase additional leave
	
	<li>
	Generous employer pension contributions
	
	<li>
	Life assurance
	
	<li>
	Employee Assistance Programme
	
	<li>
	Employee discounts platform 
	 
	If you are interested in this opportunity please get in touch with Eleni at 07415558839 or submit your CV at eleni.avgenaki@jacksonhogg.com
	
</ul>

Product Support Engineer

Jackson Hogg are proudly supporting a specialist engineering business in the Newcastle Upon Tyne area with a Project Quality Engineer position, reporting to the Quality Manager. 

Project Quality Engineer Responsibilities

The Project Quality Engineer is responsible for providing embedded quality assurance and control at project level, ensuring that projects are delivered in compliance with contractual, regulatory, and internal Quality Management System requirements.

In addition to project delivery support, the Project Quality Engineer contributes to the maintenance, improvement, and development of the Quality Management System, supporting procedure updates, document control, lessons learned, and continual improvement initiatives.

<ul>
	<li>Act as the primary Quality point of contact for assigned projects.
	<li>Support tender, contract review, and project handover activities from a Quality perspective.
	<li>Develop, review, and maintain Project Quality Plans (PQPs), ITPs, Activity Control Plans, and inspection regimes.
	<li>Support project gate reviews, readiness reviews, mobilisations, and demobilisations.
	<li>Conduct or coordinate quality inspections, witnessing, and surveillance activities.
	<li>Support FATs, SITs, mobilisation inspections, and subcontractor inspections as required.
	<li>Verify inspection records, certificates, and quality documentation are complete, accurate, and traceable.
	<li>Raise, manage, and track NCRs, concessions, and technical queries at project level.
	<li>Support root cause analysis and corrective action development.
	<li>Verify implementation and effectiveness of corrective actions prior to close-out.
	<li>Escalate systemic or high-risk quality issues to the Quality Manager.
	<li>Support internal, supplier, project, and client audits.
	<li>Prepare projects for audit and support close-out of findings.
	<li>Contribute audit findings and lessons learned into business-wide improvement activities.
	<li>Support maintenance of the Audit Schedule and audit records.
	<li>Support the development, review, and update of Quality procedures, forms, and templates.
	<li>Assist with document control, version control, and records management activities.
	<li>Contribute to the implementation and improvement of the integrated Business Management System (IMS).
	<li>Support the capture and integration of lessons learned into procedures and guidance.
</ul>

Project Quality Engineer Requirements 

<ul>
	<li>Working knowledge of ISO 9001 (ISO 14001 / 45001 desirable)
	<li>Experience in project-based engineering 
	<li>Internal or Lead Auditor training
	<li>Experience with management system documentation and audits
</ul>

Project Quality Engineer

Jackson Hogg have partnered with a Teesside based chemical manufacturer on a COMAH Safety Specialist position on a 12 month Fixed Term Contract. 

The COMAH Safety Specialist will support the development and submission of the business&apos; five year COMAH Safety Report.

This is an initial 12 month FTC which may be extended due to business needs, providing technial and regulatory support to ensure the Safety Report meets COMAH Regulations and Competent Authority (CA) Expectations. 

 
COMAH Safety Specialist Requirements

<ul>
	<li>Proven experience authoring and/or contributing to COMAH Safety Reports (Top-Tier preferred)
	<li>Strong understanding of Competent Authority requirements, including HSE/EA expectations
	<li>Experience working with high-hazard chemical or process industries
	<li>Ability to work collaboratively with site teams and technical specialists
	<li>Strong written, analytical, and regulatory interpretation skills
	<li>Role Overview
	<li>Support the structured development, review, and update of the COMAH Safety Report
	<li>Provide assurance that content aligns with regulatory guidance and CA expectations
	<li>Support gap analysis, action tracking, and readiness for submission
	<li>Engage with internal stakeholders to ensure technical accuracy and consistency
	<li>Flexible, rolling engagement through 2026
	<li>UK-based (hybrid working considered)
</ul>

COMAH Safety Report Specialist 

Jackson Hogg are proudly supporting a specialist manufacturing business in the Durham area on a QHSE Director position, reporting to the Chief Operating Officer.

 

Our client is seeking an experienced QHSE Director to lead the QHSE and Security functions on site. A senior leadership position that requires strong leadership skills, the ability to engage with senior and executive leadership whilst ensuring compliance across all operational areas.

 

QHSE Director Responsibilities

 

<ul>
	<li>Develop, implement, and continuously improve integrated QEHSS strategies aligned with business objectives and regulatory requirements
	<li>Act as trusted advisor to the Executive Leadership Team on all matters relating to quality, environmental impact, health & safety, and security risks
	<li>Challenge existing practices and drive cultural change to embed QEHSS excellence throughout the organisation
	<li>Lead the development of QEHSS policies, procedures, and management systems to world-class standards
</ul>

 

Quality Assurance & Management

 

<ul>
	<li>Oversee comprehensive quality assurance programmes across all business operations
	<li>Ensure compliance with ISO 9001 and ISO 14001 standards and maintain certification
	<li>Oversee operations working to ISO 45001 standard principles
	<li>Drive continuous improvement initiatives and operational excellence programmes
	<li>Manage customer quality requirements and be the key interface with external auditors and certification bodies
	<li>Develop and maintain quality protocols for space payload applications and aerospace/defence industry requirements
	<li>Working knowledge of AS9100 certification requirements for Aviation, Space, and Defence (AS&D) industry standards
</ul>

 

HSE & Leadership

 

<ul>
	<li>Serve as the statutory &apos;Responsible Person&apos; for health and safety under relevant legislation
	<li>Develop and maintain robust health and safety management systems
	<li>Ensure compliance with all applicable health and safety regulations and standards
	<li>Lead incident investigation, root cause analysis, and corrective action implementation
	<li>Drive safety culture transformation and behavioural change programmes
	<li>Develop and implement environmental management strategies and policies
	<li>Ensure compliance with environmental legislation and permit conditions
	<li>Drive sustainability initiatives and environmental impact reduction programs
	<li>Manage environmental risk assessments and mitigation strategies
</ul>

 

QHSE Director Requirements

 

<ul>
	<li>Bachelor’s degree in engineering, Environmental Science, Occupational Health & Safety, or a related field, or demonstrable relevant experience
	<li>Chartered status with relevant professional body (for example IOSH, IEMA, CQI)
	<li>NEBOSH Diploma or equivalent health and safety qualification
	<li>Working experience within the aerospace sector
	<li>Lead Auditor certification for relevant ISO standards (i.e. ISO9001, ISO14001, ISO45001)
	<li>Demonstrable evidence of continuous professional development
	<li>Deep understanding of ISO 9001, ISO 14001, and working knowledge of ISO 45001 principles
	<li>Knowledge of AS9100 certification requirements for aerospace, space, and defence industries
	<li>Comprehensive knowledge of UK health and safety legislation and regulations
	<li>Strong understanding of environmental law and sustainability principles
	<li>Knowledge of information security principles, cybersecurity frameworks, and data protection regulations (GDPR)
	<li>Experience with quality assurance methodologies and continuous improvement tools
	<li>Understanding of quality protocols and highly regulated industry requirements
</ul>

Director of QEHSS

Jackson Hogg have partnered with a specialist manufacturing business in the North Yorkshire area on a Quality Engineer position, reporting into the Quality Manager.

The Quality Engineer will be responsible for the following:

<ul>
	<li>Developing and implementing quality assurance processes and procedures (including ISO standards and CE/UKCA marking).
	<li>Interpreting detailed engineering drawings and specifications to define quality requirements.
	<li>Analysing any quality performance data to identify trends and areas for improvement.
	<li>Conducting root cause analysis and corrective/preventive actions (CAPA).
	<li>Collaborating with suppliers to ensuring incoming materials and services meet specifications.
	<li>Using Lean and Six Sigma methodologies and supporting 5S principles.
	<li>Supporting non-conformance management and ensure effective resolution
	<li>Travelling across the country to visit and supportbusiness locations - some overnight travel will be required. 
</ul>

Quality Engineer Requirements 

<ul>
	<li>Degree or HNC/HND in Engineering, Quality Management (or similar) OR experience working in similar Quality Engineer role (in a manufacturing or engineering environment).
	<li>Comfortable using a range of Quality tools, techniques and quality management systems – (ie ISO 9001, IATF 16949, 8D, FMEA, SPC, PPAP, MSA).
	<li>Experience with ISO auditing (internal or external) preferred
	<li>Good communication and cross-functional teamwork abilities.
</ul>

Quality Engineer Package:

<ul>
	<li>Car Allowance | Company Car with Fuel Card 
	<li>25 days holiday plus holiday purchase scheme 
	<li>Generous employer pension contributions
	<li>Employee Assistance Programme
	<li>Employee discounts portal - Perkbox 
	<li>Life assurance
</ul>

Quality Engineer 

Property Manager / Customer Service Co-ordinator 
Newcastle 
Salary £25,000 plus bonus and excellent benefits 
Are you passionate about delivering outstanding customer service? Do you like working as part of a busy team? If so then we’d love to hear from you. Our client is looking for a proactive, detail-oriented customer service co-ordinator to lead day-to-day operations and support residential property portfolios. 
Responsibilities will include: 
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Handle customer service calls and enquiries efficiently across multiple channels.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Work closely with Portfolio Managers to manage property portfolios in line with policies and budgets.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Manage maintenance, insurance claims, and contractors, ensuring high-quality service and compliance.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Oversee tenant move-ins, move-outs, and ensure all properties meet legal and compliance standards.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Provide strategic support to achieve business objectives and KPIs.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ensure a seamless customer experience while maintaining strong relationships with tenants, contractors, and internal teams.
</ul>
Skills & Experience:

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Previous customer service experience required.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proficient in Microsoft Office (Outlook, Excel, Word).
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong attention to detail, numerical skills, and the ability to meet tight deadlines.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Preferably some experience in property management or another relevant field.
</ul>

Property Manager

The Manufacturing Process Engineer will work closely with the wider engineering team to develop new processes for NPI, improve existing processes to maximise efficiency, and support scale-up transitions for high volume production projects.

Key Responsibilities

<ul>
	<li>Day to day support of production, troubleshooting issues with manufacturing equipment in a timely manner
	<li>Developing and optimising processes in the manufacture of microelectronics products
	<li>Commissioning and qualifying new manufacturing equipment
	<li>Producing technical documentation, such operating instructions, inspection standards and PFMEAs
	<li>Supporting the transition of products from NPI to production
	<li>Provide training and support to other production operators
	<li>Pro-actively identify opportunities to improve yield or manufacturing efficiency and to instigate and support continuous 
	improvement activities
	<li>Gain and maintain detailed knowledge of the production process and equipment
	<li>Liaising with customers and suppliers
	<li>Ensure safe working practices are adopted and health and safety legislation are adhered to when implementing new 
	products, materials processes, or equipment.
</ul>

Requirements

<ul>
	<li>Degree/HNC in an engineering discipline or equivalent experience
	<li>Awareness of manufacturing hybrid circuits and multi chip modules (chip and wire assembly)
	<li>Sound knowledge of engineering principles and concepts; Lean, 8D, Design of experiments
	<li>Familiarity with electronics & mechanical CAD design
	<li>Have a strong technical bias, with strong problem-solving abilities.
	<li>A good level of competence with MS Office applications for documentation and presenting reports.
</ul>

Desirable Experience

<ul>
	<li>Knowledge of lean manufacturing tools and statistical process techniques
	<li>Familiarity with Mil standard and design for high reliability environments
</ul>

Process Engineer

Production Manager - Progression Opportunities

We’re working with a growing manufacturing business to recruit a hands-on Production Manager to take ownership of day-to-day factory operations.

This role suits someone who enjoys leading from the front, improving production flow and getting the best out of people. You’ll oversee planning, people and performance on the shop floor, ensuring work is delivered safely, efficiently and to a high standard.

As the business continues to grow, there is clear scope for progression into a broader operations role.

Key Responsibilities

<ul>
	<li>
	Lead and manage daily manufacturing and production activities
	
	<li>
	Oversee planning, workflow and resource allocation
	
	<li>
	Drive improvements in efficiency, quality and delivery
	
	<li>
	Lead, coach and develop shop-floor teams
	
	<li>
	Support the introduction of better processes and systems
	
</ul>

What We’re Looking For

<ul>
	<li>
	Experience in a manufacturing or production leadership role
	
	<li>
	Strong people leadership and communication skills
	
	<li>
	Organised, proactive and process-driven
	
	<li>
	Comfortable working in a fast-paced, changing environment
	
	<li>
	Background in joinery, timber or similar manufacturing environments preferred
	
</ul>

? Apply now to find out more about this opportunity.

Production Manager / Operations Manager

Head of Corporate Services 
Location: Tyne and Wear 
Salary: £85,000 
Are you a strategic leader with a passion for people, governance,  and high-quality corporate services? I’m delighted to be supporting this North East client in their search for an experienced Head of Corporate Services to play a pivotal role in shaping how their organisation is governed, supported, and developed. 
As Head of Corporate Services, you will lead the HR, governance and administrative functions, ensuring  operations are efficient, transparent, and aligned with both legal requirements and organisational values. Working closely with the Strategic Director and Board, you will help drive strategy and embed a strong culture of accountability, collaboration, and continuous improvement. 
Duties and responsibilities will include: 
People, HR & Organisational Development
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Lead HR, Learning & Development, and workforce planning to support the clients’ strategic goals.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Champion staff engagement, performance, wellbeing, and development.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Ensure HR policies are compliant, fair, and up to date.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Align local HR practices with the wider Group HR strategy.
</ul>
Governance & Risk

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Lead and strengthen governance framework in line with legal and internal standards.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Act as a trusted advisor to the Managing Director and Board on governance and risk matters.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Oversee Board and committee activity, including agendas, papers, and minutes.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintain and develop policies, documentation, and governance reporting.
</ul>
Corporate & Administrative Services

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Manage and develop the administrative team, ensuring high-quality support to corporate and Board functions.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintain effective systems for meetings, document control, and office operations.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Drive the use of digital tools to improve efficiency and accuracy.
</ul>
Leadership & Strategy

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Lead the Corporate Services Department with clear direction and purpose.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Manage key roles including the Governance Officer and Corporate Services Assistant.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Support and promote company values and culture across the organisation.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Work with the Director of Strategy to deliver  strategic objectives.
</ul>
Criteria: 
You will be a confident, credible leader with strong judgement and excellent interpersonal skills. You’ll be comfortable working at Board level, managing complexity, and balancing strategic thinking with operational delivery. 
You will bring:

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong knowledge of corporate governance principles.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Proven leadership experience in governance, HR, or corporate/administrative services.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">The ability to lead teams, manage competing priorities, and deliver results.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Excellent communication, organisational, and relationship-building skills.
</ul>
Qualifications

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Degree (or equivalent experience) in HR, business management, governance or a related field.
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Professional membership (e.g. CIPD) is desirable.
</ul>

Head of Corporate Services

Nottingham  
Essex  
Milton Keynes  
 
Jackson Hogg is supporting a highly respected and long-established organisation recognised for its commitment to innovation and safety in electrical systems. The business operates across healthcare and industrial sectors where electrical safety and continuous operation are critical.

With over 75 years at the forefront of electrical safety innovation, the company has built a strong reputation for providing high-quality products, technically robust solutions, and deep expertise in international electrical safety standards.

The Role – Field Service Engineer (Healthcare)

Primarily working within the healthcare sector, across leading NHS Trusts and private hospitals, this role is responsible for the commissioning, servicing and rapid-response call-outs of Medical IT systems (IPS), theatre control panels, operating lights, medical tables and turnkey theatre packages.

Key Responsibilities

<ul>
	<li>
	Commission and service Medical IT systems, surgeons’ control panels, theatre operating lights, medical tables, pendants and associated equipment
	
	<li>
	Service third-party equipment where required
	
	<li>
	Participate in an on-call rota and respond within agreed service-level timescales
	
	<li>
	Log all cases and call-outs when working out of hours
	
	<li>
	Represent the business professionally on-site, delivering excellent customer service to hospital staff, contractors and end users
	
	<li>
	Complete job-specific risk assessments and method statements
	
	<li>
	Support the industrial team with on-site technical commissioning and servicing as required
	
	<li>
	Provide remote service monitoring and data analysis
	
	<li>
	Deliver on-site training to customers on supplied equipment
	
	<li>
	Attend site meetings where required
	
	<li>
	Upload programmes upon project completion
	
	<li>
	Work collaboratively with internal departments, promoting a strong “one team” approach
	
</ul>

Key Attributes

<ul>
	<li>
	Dedication to meeting customer needs and delivering high standards of service
	
	<li>
	A commitment to excellence in all aspects of work
	
	<li>
	Ability to build and maintain long-term customer relationships
	
	<li>
	Comfortable working independently and as part of a wider team
	
</ul>

Qualifications and Requirements

<ul>
	<li>
	Qualified Electrician – 18th Edition
	
	<li>
	ECS / JIB Gold Card
	
	<li>
	Clean UK driving licence
	
	<li>
	SSSTS card desirable
	
</ul>

Salary and Benefits

Salary: £42,000 based on 37.5 hours per week, including an average of 20 hours out-of-hours work per month

Additional earnings: Up to £20,000 through overtime and additional out-of-hours work

Bonus: Eligibility to participate in the annual company bonus scheme

Vehicle: Company van provided

Holiday: 25 days plus 8 bank holidays, with buy/sell option available

Pension: 6% employer contribution

Benefits: Access to high-street discount schemes

Wellbeing: Private medical cover (single) and employee assistance programme

Social: Regular company and team social events

Development: Ongoing professional development and long-term career progression

Working pattern: Home-based role with regional travel to customer sites

The Opportunity

This is a long-term, permanent opportunity to join a growing team within a thriving, global, family-owned organisation that is recognised as an expert in electrical safety. The role offers stability, autonomy and strong career prospects.

Commissioning Engineer

Jackson Hogg is working with a well-established manufacturing business to recruit a Production Team Leader for their Electrical Production site based in Melsonby.

This role offers the opportunity to lead a skilled production team, drive daily performance, and play a key role in maintaining high standards of safety, quality and delivery within a structured manufacturing environment.

The Role

As Production Team Leader, you will be responsible for leading, motivating and managing daily team activities, ensuring alignment with weekly production plans set by the Production Manager. You will act as a key point of communication between production and management, while driving continuous improvement across the operation.

Key responsibilities include:

<ul>
	<li>Leading and coordinating daily production activities to meet output and delivery targets</li>
	<li>Overseeing Traffic Controller production, testing and quality control</li>
	<li>Taking full ownership of team safety and quality performance</li>
	<li>Driving Lean Manufacturing and continuous improvement initiatives</li>
	<li>Ensuring on-time delivery of products to customers</li>
	<li>Championing company standards, behaviours and culture</li>
	<li>Supporting, developing and motivating team members</li>
</ul>

What We’re Looking For

<ul>
	<li>At least 3 years’ hands-on experience in an electro-mechanical production environment</li>
	<li>Proven experience in a supervisory or team leadership role within manufacturing</li>
	<li>Strong logical and creative problem-solving skills</li>
	<li>Lean Manufacturing, Six Sigma or equivalent training</li>
	<li>Experience planning tasks and documenting processes</li>
	<li>Proficient in MS Office (Word, Excel, Outlook)</li>
</ul>

What’s On Offer

<ul>
	<li>Salary up to £32,000 per year</li>
	<li>25 days holiday rising to 28 days (excluding bank holidays)</li>
	<li>Option to buy additional annual leave</li>
	<li>Your Birthday Off</li>
	<li>Employee discounts portal (Perkbox)</li>
	<li>Generous employer pension contributions</li>
	<li>Employee Assistance Programme</li>
	<li>Life assurance</li>
	<li>Supportive working environment with development opportunities</li>
</ul>

Electrical Assembly Team Leader 

Sales Manager 

About the Company 
Our client is a cutting-edge biotechnology organization working at the intersection of aging science, AI-driven biology, and drug discovery. Their mission is to develop therapies for age-related and chronic conditions by leveraging foundational models trained on large-scale longitudinal human data. Using advanced techniques to extract biological latent features and integrate genetics with multi-omics, the team is accelerating target discovery and therapeutic development beyond traditional clinical coding frameworks.

Role Overview 
The company is seeking a Statistical Geneticist, Computational Biologist, or Bioinformatics Scientist experienced in deep learning applications for variant annotation and functional genomics. The hire will contribute to a next-generation target discovery platform, working with AI models, multi-omics resources, and population-scale genetic datasets to identify therapeutic targets and accelerate drug discovery. Responsibilities include processing genetic datasets (GWAS/PheWAS), building robust pipelines, implementing state-of-the-art methods, and delivering production-quality code. Ideal candidates have strong computational genomics expertise and an interest in translating biological data into real therapeutic insights.

Key Responsibilities 
• Manage and preprocess genetics and tabular datasets, including plink-formatted data, GWAS summary statistics, and molQTL datasets. 
• Conduct common and rare variant association studies (WGS/WES) and post-GWAS analyses, including colocalization, Mendelian randomization, and integration with transcriptomic/proteomic data. 
• Apply classical machine learning and deep learning approaches to functional genomics problems. 
• Develop, maintain, and scale automated pipelines for association studies while ensuring code quality and reproducibility.

Qualifications & Experience 
Education: MSc or PhD in Statistical Genetics, Bioinformatics, Biostatistics, Computer Science, or a related quantitative discipline.

Experience Requirements: 
• 3+ years of relevant hands-on experience post-MSc (doctoral research substitutes for PhD tracks). 
• Demonstrated experience analyzing large datasets using statistical inference and machine learning. 
• Relevant scientific publications in reputable venues.

Technical Competencies: 
• Advanced Python and R programming skills. 
• Comfort working in Unix/Linux environments. 
• Practical experience with population genetics, GWAS, and post-GWAS analysis frameworks. 
• HPC or cloud computing experience required. 
• Training deep neural networks is considered a strong plus.

Personal Traits 
The ideal candidate is proactive, resourceful, and thrives in fast-moving, highly autonomous settings. Adaptability and curiosity about emerging scientific technologies are essential.

What the Company Offers 
• Competitive compensation aligned with industry expectations. 
• Fully remote work environment with flexible scheduling. 
• High-trust, low-bureaucracy culture emphasizing ownership and accountability. 
• Direct impact on core therapeutic discovery efforts from day one. 
• Support for scientific publication and research visibility.

Statistical Geneticist

Lead E&I Engineer

Newcastle Upon Tyne

Salary: up to £65,000 basic + benefits

Jackson Hogg is delighted to be working with a leading engineering consultancy to bring a Lead E&I Engineer to take ownership of Electrical & Instrumentation delivery across complex engineering projects.

This is a permanent, full time on site role based in Newcastle.

Lead E&i Engineer Key Responsibilities:

<ul>
	<li>
	Lead the delivery of the E&I scope to agreed time, cost, and quality targets
	
	<li>
	Provide technical and people leadership to E&I engineers and designers
	
	<li>
	Own E&I engineering schedules, deliverables, and progress reporting
	
	<li>
	Manage E&I manhour budgets, resourcing levels, and workload planning
	
	<li>
	Ensure all E&I designs comply with legislation, industry standards, and client specifications
	
	<li>
	Control and manage scope change in line with formal change management procedures
	
	<li>
	Maintain technical integrity and accuracy across all E&I deliverables
	
	<li>
	Participate in and contribute to HAZID, HAZOP, safety, and design reviews
	
	<li>
	Provide guidance on hazardous area installations, including ATEX compliance
	
	<li>
	Ensure all documentation is checked and approved in line with company procedures
	
	<li>
	Support tendering activities, including scope definition and CTR generation
	
	<li>
	Coach and develop Engineers, Graduates, and Trainees within the discipline
	
</ul>

Lead E&I Engineer Key Requirements:

<ul>
	<li>
	HNC or higher in Electrical or Instrumentation Engineering
	
	<li>
	Significant experience delivering E&I engineering on Oil & Gas brownfield projects (Feasibility, Concept, FEED, EPC)
	
	<li>
	Proven experience leading E&I engineering teams on projects
	
	<li>
	Strong working knowledge of industry codes, standards, and legislation
	
	<li>
	Experience with manhour control, cost awareness, and change management
	
	<li>
	Solid understanding of hazardous area design and ATEX directives
	
	<li>
	Experience contributing to HAZOP, HAZID, and constructability reviews
	
	<li>
	Excellent communication and stakeholder management skills
	
	<li>
	Strong commercial awareness and ability to operate at project leadership level
	
</ul>

Desirable

<ul>
	<li>
	Degree in Electrical or Instrumentation Engineering
	
	<li>
	Chartered status (CEng / MIET)
	
	<li>
	SIL experience
	
	<li>
	Offshore experience and/or offshore survey exposure
	
	<li>
	BOSIET certification
	
</ul>

If you are interested in this opportunity please contact Eleni at 07415558839 or eleni.avgenaki@jacksonhogg.com

Lead E&I Engineer

Regional Sales Manager – EMEA / APAC

We are recruiting on behalf of a global, engineering-led organisation operating across the Pharmaceutical, Chemical, Power Generation and wider process industries. This is a commercial role focused on driving growth across EMEA and APAC through a combination of new business development and key account management.

This opportunity offers exposure to international markets, innovative pressure safety products and close collaboration with engineering, marketing and commercial teams.

The role

<ul>
	<li>
	Develop new business and grow existing key accounts across EMEA and APAC
	
	<li>
	Deliver revenue and profit targets across established and emerging markets
	
	<li>
	Introduce innovative, market-leading pressure safety products and services
	
	<li>
	Lead pricing, quotations and commercial negotiations
	
	<li>
	Build long-term relationships with key customers and partners
	
	<li>
	Work closely with engineering, marketing and market-reach teams
	
	<li>
	Represent the business at trade shows, conferences and customer meetings
	
	<li>
	Manage and support regional rep agencies
	
</ul>

Sectors

<ul>
	<li>
	Pharmaceutical process
	
	<li>
	Chemical process
	
	<li>
	Power generation
	
	<li>
	Process-led industrial markets
	
</ul>

About you

<ul>
	<li>
	Proven track record in B2B sales or business development
	
	<li>
	Experience in consultative, value-add selling environments
	
	<li>
	Comfortable managing international accounts and travelling regularly
	
	<li>
	Strong commercial, analytical and relationship-building skills
	
	<li>
	Technical, engineering or process-industry background advantageous
	
</ul>

Package & benefits

<ul>
	<li>
	Competitive base salary
	
	<li>
	Car allowance 
	
	<li>
	Quarterly bonus scheme
	
	<li>
	Enhanced pension with employer contributions up to 10.5%
	
	<li>
	25 days annual leave plus public holidays
	
	<li>
	BUPA private medical insurance
	
	<li>
	Cycle to Work scheme
	
	<li>
	Death in service benefit
	
	<li>
	14 weeks paid maternity, adoption and paternity leave
	
	<li>
	Flexible and hybrid working patterns
	
</ul>

Regional Sales Manager 

Lead Mechanical Piping Engineer 

Full-time & Permanent 

Jackson Hogg is delighted to be recruiting for a Lead Mechanical Piping Engineer to work for a leading engineering business operating across the onshore energy sector. This role will support the delivery of complex petrochemical, waste-to-energy and renewable energy projects with additional team management responsibilities. 

The successful Lead Mechanical Piping Engineer will play a key role in leading a team and overseeing all mechanical and piping engineering activities across the project lifecycle, from concept through to delivery. The ideal candidate will act as the focal point for mechanical engineering and ideally have experience/knowledge of piping engineering within this sector.

Key Responsibilities - Lead Mechanical Piping Engineer

<ul>
	<li>
	Lead and oversee all mechanical and piping engineering activities in line with QA systems, client procedures and industry codes
	
	<li>
	Provide technical direction, consultancy and decision-making across concept, FEED and detailed design phases
	
	<li>
	Review and approve specifications, data sheets, requisitions, drawings and vendor documentation
	
	<li>
	Ensure technical accuracy, integrity and compliance of all mechanical and piping deliverables
	
	<li>
	Coordinate with project, engineering and client teams to ensure timely and cost-effective delivery
	
	<li>
	Supervise, mentor and allocate work to mechanical and piping engineers, supporting staff development
	
</ul>

Key Requirements - Lead Mechanical Piping Engineer

<ul>
	<li>
	Degree qualified in Mechanical Engineering or a related discipline (Chartered Engineer status desirable)
	
	<li>
	Extensive experience within the onshore energy sector, including petrochemical, waste-to-energy or renewables
	
	<li>
	Proven ability to develop concepts through to detailed design review and execution
	
	<li>
	Demonstrated leadership experience in a supervisory or lead engineering role
	
	<li>
	Strong knowledge of relevant mechanical and piping codes, standards and analytical techniques
	
	<li>
	Ability to work independently, manage priorities and deliver under tight project timescales
	
</ul>

If you are an experienced Lead Mechanical Engineer, or a Senior Mechanical Engineer with experience/knowledge of piping engineering and looking to take the next step in your career, please submit your CV online or contact Eleanor Buckley at Jackson Hogg to register your interest and learn more about this exciting opportunity.

Lead Mechanical/Piping Engineer

Jackson Hogg is supporting a fantastic organisation in Blyth on the appointment of an Assistant Accountant

Duties and Responsibilities of Assistant Accountant

<ul>
	<li>Cashbook processing, posting, reconciliation and analysis
	<li>Monthly bank reconciliations
	<li>Petty cash and credit card management
	<li>Analysis and investigation of P&L and income expenditure
	<li>Assisting in aspects of management accounts preparation, including journal posting and account reconciliation
	<li>Fixed assets register maintenance
	<li>Responsibility for management of utilities, including mobile phones
	<li>Assisting in preparation of year end information and liaising with the auditors
	<li>Other activities within the Finance team: supporting purchase ledger and sales ledger
</ul>

 

Skill Requirements

<ul>
	<li>Experienced in a similar role as an Assistant Accountant
	<li>Strong communication and interpersonal skills
	<li>Ability to work as an individual as well as a good team player
	<li>Strong IT / Microsoft Office (especially Excel) skills
	<li>Excellent numerical and analytical skills, with the ability to challenge
	<li>Ability to plan and manage changing priorities
</ul>

Remuneration

<ul>
	<li>£35,000 per annum depending on experience for 37.5 hours per week
	<li>Private medical scheme
	<li>Defined contribution pension scheme
	<li>33 days holiday (inclusive of 8 statutory days)
	<li>Bonus scheme
</ul>

Assistant Accountant

Job Title: Project Manager / Key Account Manager 
Location: Stockton-on-Tees 
Salary: Competitive

About the Role 
 
We’re looking for a commercially minded Project Manager / Key Account Manager to lead high-value engineering and manufacturing projects (typically £5m+) while managing key client relationships. This is a dual-facing role, combining project delivery with strategic account management, ensuring projects are delivered on time, on budget, and to client expectations.

Key Responsibilities

<ul>
	<li>
	Act as the main point of contact for clients, building strong relationships and trust
	
	<li>
	Lead projects end-to-end, overseeing delivery, budget, risk, and quality
	
	<li>
	Coordinate cross-functional teams including engineering, manufacturing, sales, and finance
	
	<li>
	Drive commercial performance, ensuring margins and internal KPIs are met
	
	<li>
	Proactively manage challenges and maintain client confidence under pressure
	
	<li>
	Identify opportunities for account growth and long-term partnership success
	
</ul>

Candidate Profile

<ul>
	<li>
	Proven experience as a Project Manager or Key Account Manager in engineering or manufacturing
	
	<li>
	Comfortable managing high-value, complex projects (£5m+)
	
	<li>
	Strong stakeholder management, negotiation, and leadership skills
	
	<li>
	Background in regulated or safety-critical sectors (marine, nuclear, etc.) is advantageous
	
	<li>
	Excellent communication, planning, and commercial awareness
	
</ul>

Benefits

<ul>
	<li>
	Up to 8% matched pension
	
	<li>
	Flexi time 
	
	<li>
	Life assurance – 4 x salary
	
	<li>
	Access to a corporate rewards platform
	
	<li>
	25 days leave + bank holidays
	
	<li>
	Onsite position
	
</ul>

Project Manager/KAM

Group Financial Controller 
County Durham 
 
Jackson Hogg are delighted to be supporting a fast growing business PLC with ambitious growth plans for the next three years. The business are seeking to recruit a Group Financial Controller to work closely with the CFO and manage and lead the finance team. This company promotes a great, welcoming and friendly culture. 
 
This role will play a key part in the company's growth and will have influence within the business outside your immediate area of responsibility, offering regular engagement with the C-Suite. 
 
Duties and Responsibilities:
<ul>
	<li>Leading a small finance team wit day to day responsibility for the finance function.
	<li>Producing consolidated Group management accounts and legal entity management accounts within the Group, across the UK, USA and China.
	<li>Sales and margin analysis.
	<li>Drive the monthly business re-forecast.
	<li>Monthly overhead cost review ensuring effective cost management.
	<li>Balance sheet control and working capital management.
	<li>Treasury management and cash flow forecasting.
	<li>Business case investment calculations for commercial opportunities and engineering developments - NPV, ROI, and payback.
	<li>Monthly review of the Group payroll.
	<li>Manage the on-site year-end audit, preparation of statutory accounts at subsidiary level and assist with the group statutory accounts prepared under full IFRS.
</ul>
 
You will be/have:

<ul>
	<li>Qualified accountant - CIMA/ACCA/ACA
	<li>Ambitious - willing to take ownership and solve problems/
	<li>Flexible approach to support business requirements.
	<li>Previous management experience of a small team.
	<li>Strong communication and presentation skills.
	<li>Strong IT skills - including previous experience of ERP systems.
</ul>

Group Financial Controller

Jackson Hogg is again supporting a local engineering client seeking skilled CNC Millers to join an experienced and dedicated production team on a permanent basis. This role is ideal for a time-served CNC Machinist who is committed to quality, precision, and continuous improvement. 
 
As a CNC Miller, you will play a key role in ensuring components are manufactured accurately, efficiently, and to the highest standards. You will be responsible for producing complex components while supporting production targets and maintaining strict quality and safety standards. 
 
<div style="font-size: 11.0pt;">Key Responsibilities</div>

<ul>
	<li>Complete machine schedules within the required timescales and correct drawing specifications
	<li>Work methodically through tasks while ensuring quality is never compromised.
	<li>Follow all quality policies and procedures
	<li>Identify and report any quality or production issues to supervision
	<li>Maintain full product traceability throughout the machining process
	<li>Prepare, load, and set materials on machines safely and efficiently
	<li>Maximise machine utilisation while minimising downtime
	<li>Operate multiple machines when required
	<li>Mentor apprentices and colleagues when requested
	<li>Comply with all health and safety requirements at all times
</ul>
Experience & Skills 
 
<ul>
	<li>Time-served CNC Miller/Machinist, ideally through a recognised mechanical engineering apprenticeship
	<li>Strong ability to read and interpret engineering drawings
	<li>Confident understanding of geometrical tolerances
	<li>Ability to program from drawings
	<li>Experience working to and maintaining tight tolerances
	<li>Physically capable of lifting and handling heavy components safely
	<li>Experience in machining large fabrications
</ul>
 
If you are a skilled CNC Miller looking for a long-term opportunity where your expertise will be valued, we would welcome your application. 
 
Salary | Competitive 
Contract | Permanent

CNC Miller 

We are looking for a part-qualified accountant (AAT, CIMA, ACCA) to join a dynamic finance team in Darlington. This role offers excellent development opportunities, hybrid working and the chance to take ownership of divisional accounting and reporting.

Key Responsibilities:

<ul>
	<li>
	Prepare month-end P&L and balance sheets for your assigned division.
	
	<li>
	Post revenue, accrual, and prepayment journals accurately and on time.
	
	<li>
	Produce management accounts with KPIs, including revenue and margin analysis.
	
	<li>
	Reconcile balance sheet accounts and support budgets, forecasts and ad-hoc analysis.
	
	<li>
	Deliver clear and insightful financial information to support business performance.
	
</ul>

Skills & Experience:

<ul>
	<li>
	Qualified AAT or working towards CIMA/ACCA.
	
	<li>
	Strong financial reporting and analytical skills.
	
	<li>
	Intermediate/advanced Excel skills.
	
	<li>
	Organised, detail-oriented, self-motivated, and able to work independently or in a team.
	
	<li>
	Strong communication and interpersonal skills, adaptable to competing priorities.
	
</ul>

Benefits:

<ul>
	<li>
	25 days holiday plus bank holidays & birthday off
	
	<li>
	Holiday purchase scheme
	
	<li>
	Employee rewards and wellbeing programs
	
	<li>
	Enhanced sick and maternity pay
	
</ul>

Management Accountant

PA / Business Administrator

<h2>About the job</h2>

On behalf of an international wastewater treatment equipment manufacturer, we are recruiting a Sales Engineer (M/F/X).

Our client is a Belgian-based company that is part of a larger international industrial group with operations across multiple continents. The business designs, manufactures, and supplies specialized equipment for wastewater and water treatment applications, including aeration, mixing, decanting, and foam control systems.

With strong in-house R&D capabilities and patented technologies, the company is recognized as a key supplier in the global wastewater treatment market. To support continued growth, we are looking for a Sales Engineer to strengthen the commercial team.

<hr>
<h2>Sales Engineer (M/F/X)</h2>

Wastewater Treatment Sector

<h3>Job Description</h3>

Following comprehensive internal training, you will join the sales team and play an active role in developing the company’s wastewater treatment business.

Your responsibilities will include:

<ul>
	<li>
	Reporting directly to the Sales Manager
	
	<li>
	Preparing technical and commercial proposals in close collaboration with the engineering team
	
	<li>
	Following up quotations, negotiating contracts, and closing sales
	
	<li>
	Providing commercial support and backup to sales colleagues when required
	
	<li>
	Managing and developing a network of agents and distributors
	
	<li>
	Developing direct sales of the full product portfolio to contractors, industrial clients, and public authorities
	
	<li>
	Supporting the definition and execution of the sales strategy and related action plans
	
	<li>
	Acting as a key point of contact for customers and monitoring overall customer satisfaction
	
</ul>

The position is based in Halle (Belgium), approximately 20 minutes from Brussels. Travel will account for approximately 20% of your time, mainly within Belgium and Europe (customer visits, trade fairs). Depending on experience, exposure to export markets (Asia, Africa) may also be possible.

<hr>
<h3>Requirements</h3>

<ul>
	<li>
	Engineering degree or Business School diploma
	
	<li>
	Minimum 5 years of experience in B2B sales of technical or industrial products
	
	<li>
	Fluency in Dutch, English, and French
	
	<li>
	Strong commercial skills with excellent communication abilities
	
	<li>
	Interest in wastewater treatment, environmental technologies, and industrial solutions
	
	<li>
	Proficient in Microsoft Office and professional social media tools (especially LinkedIn)
	
	<li>
	Results-driven, flexible, customer-oriented, and proactive
	
	<li>
	Team player with the ability to work independently
	
	<li>
	Experience in the wastewater or water treatment sector is a strong advantage
	
</ul>

<hr>
<h3>What’s on Offer</h3>

<ul>
	<li>
	A pleasant working atmosphere within a dynamic and experienced team
	
	<li>
	A multicultural and international working environment
	
	<li>
	A challenging role in the wastewater treatment sector with strong environmental impact
	
	<li>
	Competitive compensation package (fixed salary + variable)
	
	<li>
	Company car
	
	<li>
	Sector pension plan and company health insurance
	
</ul>

<h2>About the job</h2>

On behalf of an international wastewater treatment equipment manufacturer, we are recruiting a Sales Engineer (M/F/X).

Our client is a Belgian-based company that is part of a larger international industrial group with operations across multiple continents. The business designs, manufactures, and supplies specialized equipment for wastewater and water treatment applications, including aeration, mixing, decanting, and foam control systems.

With strong in-house R&D capabilities and patented technologies, the company is recognized as a key supplier in the global wastewater treatment market. To support continued growth, we are looking for a Sales Engineer to strengthen the commercial team.

<hr>
<h2>Sales Engineer (M/F/X)</h2>

Wastewater Treatment Sector

<h3>Job Description</h3>

Following comprehensive internal training, you will join the sales team and play an active role in developing the company’s wastewater treatment business.

Your responsibilities will include:

<ul>
	<li>
	Reporting directly to the Sales Manager
	
	<li>
	Preparing technical and commercial proposals in close collaboration with the engineering team
	
	<li>
	Following up quotations, negotiating contracts, and closing sales
	
	<li>
	Providing commercial support and backup to sales colleagues when required
	
	<li>
	Managing and developing a network of agents and distributors
	
	<li>
	Developing direct sales of the full product portfolio to contractors, industrial clients, and public authorities
	
	<li>
	Supporting the definition and execution of the sales strategy and related action plans
	
	<li>
	Acting as a key point of contact for customers and monitoring overall customer satisfaction
	
</ul>

The position is based in Halle (Belgium), approximately 20 minutes from Brussels. Travel will account for approximately 20% of your time, mainly within Belgium and Europe (customer visits, trade fairs). Depending on experience, exposure to export markets (Asia, Africa) may also be possible.

<hr>
<h3>Requirements</h3>

<ul>
	<li>
	Engineering degree or Business School diploma
	
	<li>
	Minimum 5 years of experience in B2B sales of technical or industrial products
	
	<li>
	Fluency in Dutch, English, and French
	
	<li>
	Strong commercial skills with excellent communication abilities
	
	<li>
	Interest in wastewater treatment, environmental technologies, and industrial solutions
	
	<li>
	Proficient in Microsoft Office and professional social media tools (especially LinkedIn)
	
	<li>
	Results-driven, flexible, customer-oriented, and proactive
	
	<li>
	Team player with the ability to work independently
	
	<li>
	Experience in the wastewater or water treatment sector is a strong advantage
	
</ul>

<hr>
<h3>What’s on Offer</h3>

<ul>
	<li>
	A pleasant working atmosphere within a dynamic and experienced team
	
	<li>
	A multicultural and international working environment
	
	<li>
	A challenging role in the wastewater treatment sector with strong environmental impact
	
	<li>
	Competitive compensation package (fixed salary + variable)
	
	<li>
	Company car
	
	<li>
	Sector pension plan and company health insurance
	
</ul>

Sales Engineer 

The role

Our client is looking to recruit an Assistant Financial Controller role supporting the FC across a number of high volume manufacturing business units, with around £100m turnover. The position combines strong technical accounting and reporting with people leadership, providing robust financial control, insight, and support across month-end, forecasting, audit, and compliance.

Key responsibilities

<ul>
	<li>Lead the month end close, including accruals, variance analysis, and forecast vs actual reporting.
	<li>Preparation of management accounts, forecasts, and balance sheet reviews across 2 Business Units
	<li>Line management and development of 3 finance team members, ensuring delivery to deadlines and high standards
	<li>Preparation and upload of TB and statistical data into HFM
	<li>Full ownership of balance sheet reconciliations to SOX standards
	<li>Fixed asset and Capex tracking
	<li>Year-end audit pack preparation and liaison with external auditors
	<li>Weekly cashflow forecasting and variance analysis
	<li>Support standard costing, price variance analysis, and purchasing savings reporting
	<li>Stock counts, and continuous process improvement
	<li>Provide cover for the Financial Controller when required
</ul>

About you

<ul>
	<li>Qualified or finalist CIMA / ACCA
	<li>Strong month-end, reporting, and forecasting experience
	<li>Proven people management experience
	<li>Manufacturing experience essential or from a fast paced industry
	<li>Advanced Excel skills
	<li>Confident, organised, and comfortable operating in a fast-paced operational environment
</ul>

Assistant Financial Controller

Receptionist / Administrator, Darlington 
Salary circa £30,000 
  
About the Role 
This is a professional, welcoming, and highly organised position, serving as the first point of contact for our Darlington office. You will play a key role in creating a smooth and positive experience for visitors, clients, and colleagues, balancing essential administrative duties with exceptional customer service. 
 
Key Responsibilities
<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Act as the primary point of contact for all visitors and callers, delivering a warm, professional, and helpful experience.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Answer, screen, and direct incoming calls promptly and courteously.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Greet visitors, ensure they feel comfortable, and provide support as needed.
</ul>

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Full administrative support for the wider teams in the business such as HR, Marketing and Operations. 
</ul>

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Manage meeting room bookings and ensure all required equipment and light refreshments are prepared in advance.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Coordinate and arrange catering or lunches for both client-facing and internal meetings.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Maintain a tidy, organised, and presentable front desk and reception area.
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Provide administrative support and assist with ad-hoc tasks across all areas of the business as required.
</ul>
 
Requirements

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Previous experience in a mixed reception / administrative role would be ideal
</ul>

<ul>
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Strong MS Office skills
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Strong communication and interpersonal skills.
	<li style="margin: 0.0cm 0.0cm 0.0cm 36.0pt;">Highly organised with excellent attention to detail.
	<li style="margin: 0.0cm 0.0cm 8.0pt 36.0pt;">Ability to multitask and prioritise effectively in a fast-paced environment.
</ul>

Administrator / Receptionist

Field Technical Support Engineer- Germany 

Apprentice Customer Service Representative – No Experience Needed! 
Location: Barwell (Fully Office-Based) 
Salary: £25,000 
Hours: Monday–Friday, 8:30am–5:00pm 
Contract: Full-Time, Permanent – Apprenticeship Opportunity 
Are you a school leaver or early-career candidate wondering what to do next? 
Want to kickstart your career with a company that will train, support, and invest in your development from day one? 
This is an exciting opportunity to join one of the UK’s most successful and fast-growing print & packaging groups. With over 900 employees and an outstanding reputation for quality and innovation, this is the perfect place to build a long-term, stable career. 
Why This Role Is a Fantastic First Step
<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">£25,000 starting salary
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Full apprenticeship training provided – earn while you learn
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Supportive, friendly office environment
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A clear pathway to progress into senior customer service or account management roles
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Great opportunity to gain professional experience without needing previous work history 
	 
</ul>
About the Role 
As an Apprentice Customer Service Representative, you’ll learn how to:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Be the first point of contact for customer enquiries
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Process orders accurately and efficiently
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Support customers with queries, issues, and delivery updates
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Work closely with internal departments to meet deadlines
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Maintain customer records and complete essential data entry
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Build strong working relationships across the business
</ul>
 
You’ll receive full training and ongoing support to help you become confident and capable in all aspects of the role. 
Who We’re Looking For 
You don’t need previous experience, just enthusiasm and the right attitude. Ideal candidates will be:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Friendly, confident communicators
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Organised and able to multitask
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Problem-solvers with patience and a positive mindset
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Team players who are eager to learn
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Looking for a long-term career, not just a job
</ul>
 
Perfect for School Leavers 
If you’re finishing school or college and not sure what direction to take, this apprenticeship gives you:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A solid professional foundation
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Office experience that opens doors
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A respected qualification
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A supportive team cheering you on
</ul>
Apprentice Customer Service Representative – No Experience Needed! 
Location: Barwell (Fully Office-Based) 
Salary: £25,000 
Hours: Monday–Friday, 8:30am–5:00pm 
Contract: Full-Time, Permanent – Apprenticeship Opportunity 
Are you a school leaver or early-career candidate wondering what to do next? 
Want to kickstart your career with a company that will train, support, and invest in your development from day one? 
This is an exciting opportunity to join one of the UK’s most successful and fast-growing print & packaging groups. With over 900 employees and an outstanding reputation for quality and innovation, this is the perfect place to build a long-term, stable career. 
Why This Role Is a Fantastic First Step

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">£25,000 starting salary
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Full apprenticeship training provided – earn while you learn
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Supportive, friendly office environment
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A clear pathway to progress into senior customer service or account management roles
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Great opportunity to gain professional experience without needing previous work history 
	 
</ul>
About the Role 
As an Apprentice Customer Service Representative, you’ll learn how to:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Be the first point of contact for customer enquiries
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Process orders accurately and efficiently
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Support customers with queries, issues, and delivery updates
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Work closely with internal departments to meet deadlines
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Maintain customer records and complete essential data entry
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Build strong working relationships across the business
</ul>
 
You’ll receive full training and ongoing support to help you become confident and capable in all aspects of the role. 
Who We’re Looking For 
You don’t need previous experience, just enthusiasm and the right attitude. Ideal candidates will be:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Friendly, confident communicators
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Organised and able to multitask
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Problem-solvers with patience and a positive mindset
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Team players who are eager to learn
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Looking for a long-term career, not just a job
</ul>
 
Perfect for School Leavers 
If you’re finishing school or college and not sure what direction to take, this apprenticeship gives you:

<ul>
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A solid professional foundation
	<li class="MsoNoSpacing" style="margin: 0.0cm;">Office experience that opens doors
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A respected qualification
	<li class="MsoNoSpacing" style="margin: 0.0cm;">A supportive team cheering you on
</ul>

Apprentice Customer Service Representative - Barwell

Temporary Credit Controller 
Gosforth (Office-based) 
3 months (Potential to extend, with possibility of permanent role) 
Open to full-time or part-time hours

About the Role: 
We are seeking an experienced Credit Controller to join our team on a temporary basis. The role will involve managing overdue accounts, maintaining strong customer relationships, and ensuring accurate financial records. This is a fantastic opportunity for someone with credit control experience to step into a busy finance team, with potential for extension or a permanent position.

Key Responsibilities:

<ul>
	<li>
	Liaise with the Sales Ledger department regarding overdue invoices
	
	<li>
	Maintain positive customer relationships while proactively chasing overdue payments
	
	<li>
	Conduct regular statement reconciliations and follow up with customers as needed
	
	<li>
	Set up and manage direct debit arrangements
	
	<li>
	Use Sage 50 for all credit control activities and reporting
	
	<li>
	Ensure all credit control processes comply with company policies and procedures
	
</ul>

Requirements:

<ul>
	<li>
	Proven experience working in credit control
	
	<li>
	Strong communication and negotiation skills
	
	<li>
	Ability to work independently and as part of a team
	
	<li>
	Proficiency in Sage 50 is essential
	
	<li>
	Strong organisational skills with attention to detail
	
</ul>

Temporary Credit Controller

Reporting to the Finance Manager, you will play a key role in ensuring the smooth and efficient running of financial operations. This is an excellent opportunity to build your career within a dynamic, global environment.

Key Responsibilities

<ul>
	<li>
	Complete assigned month-end tasks accurately and within agreed deadlines.
	
	<li>
	Maintain fixed asset registers, lease reporting, VAT and tax reporting, cash forecasting, and other financial reporting activities.
	
	<li>
	Analyse financial data, produce a range of financial reports, and provide informed recommendations.
	
	<li>
	Prepare timely and accurate balance sheet reconciliations and income statement analyses.
	
	<li>
	Support year-end close activities and statutory accounting processes.
	
	<li>
	Assist with internal and external audit requirements, liaising with auditors as needed.
	
	<li>
	Prepare annual tax pack documentation.
	
	<li>
	Identify opportunities to streamline and improve processes while ensuring compliance and strong internal controls.
	
	<li>
	Maintain and enhance Standard Operating Procedures.
	
</ul>

What You’ll Bring

<ul>
	<li>
	Part-qualified CIMA / ACCA or qualified by experience
	
	<li>
	Strong Microsoft Office skills, particularly Excel; experience with SAP is advantageous.
	
	<li>
	High level of accuracy and attention to detail.
	
	<li>
	Excellent verbal and written communication skills, with the ability to engage effectively with various stakeholders and build strong working relationships.
	
	<li>
	Strong organisational skills, with the ability to prioritise and meet deadlines.
	
	<li>
	A positive, proactive, and adaptable mindset—comfortable working both independently and as part of a team.
	
</ul>

Package:

<ul>
	<li>
	Flexible and hybrid working options.
	
	<li>
	£40,000-£45,000
	
	<li>25 days + bank holidays + birthday
	<li>
	Development and career progression opportunities.
	
</ul>

Accountant

Job Overview

Our client is looking to recruit experienced Group Payroll Manager to lead a large, centralised payroll function supporting over 20,000 employees.

This is a key Group-level role with a clear progression path to Head of Payroll, as the current Head begins a phased retirement.

Based at the Shared Service Centre in the North East, you’ll oversee a stable, well-established team and deliver payroll excellence across multiple payroll cycles.

They oversee complex end-to-end payroll activity including onboarding, leavers, statutory pay, overtime, bonuses, holiday pay calculations, TUPE, third-party payments, and full compliance with HMRC requirements (RTI, FPS/EPS, BACS, year-end submissions, P11Ds etc.).

<ul>
	<li>Leading a team of 11 (Deputy Manager, Assistant Manager, Supervisor + 8 Administrators).
	<li>Managing high-volume weekly, monthly, four-weekly and pension payrolls.
	<li>Ensuring full statutory compliance including RTI, HMRC submissions, statutory payments, pensions and year-end.
	<li>Overseeing complex calculations: holiday pay, overtime, bonuses, TUPE, back pay, starters/leavers and third-party deductions.
	<li>Managing workload, supporting team development and embedding best practice.
	<li>Handling pension administration including auto-enrolment, reconciliations, submissions and scheme changes.
	<li>Maintaining strong internal controls and supporting audits.
	<li>Helping shape system improvements and supporting the move from OpenPeople to a new payroll system (no specific software experience required).
	<li>Driving continuous improvement and ensuring payroll accuracy across the Group.
</ul>

What we’re looking for:

<ul>
	<li>CIPP qualified – essential.
	<li>Proven experience managing large, complex, multi-frequency payrolls.
	<li>Strong leadership experience in a high-volume environment.
	<li>Excellent technical payroll knowledge and understanding of current legislation.
	<li>High attention to detail with the ability to work to tight deadlines.
	<li>Advanced Excel skills (lookups, pivot tables, data validation).
	<li>Confident communicator able to work across HR, finance and senior stakeholders.
	<li>Any industry or payroll bureau or practice would be considered
</ul>

What's on offer?

<ul>
	<li>Genuine progression path to Head of Payroll as part of succession planning.
	<li>Hybrid working – typically 2 days from home.
	<li>Flexi-time, with the ability to work hours around business needs (Mon–Wed busiest due to weekly payroll).
	<li>Early finish on Fridays.
	<li>Supportive and stable team environment.
	<li>Opportunity to influence payroll transformation and system change.
</ul>

vices Payroll Manager will lead and manage the centralised payroll function. As Group Shared Services Payroll Manager, you will lead a high-performing team to deliver payroll excellence for over 24,000 employees and pensioners. Managing a skilled team of 11, the role will ensure best practice in complex payroll operations, legal compliance and delivery of exceptional service to both employees and the wider business.

Key Responsibilities:

<ul>
	<li>
	Lead and manage a centralised payroll team, ensuring best practice and high performance
	
	<li>
	Oversee end-to-end payroll processing, ensuring accuracy and compliance with statutory requirements
	
	<li>
	Maintain payroll compliance and reporting standards, including audit readiness
	
	<li>
	Manage pension administration and auto-enrolment processes
	
	<li>
	Drive process improvement initiatives and ensure smooth system and process implementations
	
	<li>
	Provide coaching, development and guidance to the payroll team
	
</ul>

Essential Skills & Experience:

<ul>
	<li>CIPP qualification
	<li>Proven experience managing high-volume, complex payroll operations
	<li>Strong leadership skills, with experience managing senior payroll professionals
	<li>Solid understanding of statutory payroll requirements and compliance
	<li>Excellent organisational, analytical and communication skills
	<li>Experience with payroll software
	<li>Project management or process improvement experience
</ul>

Group Payroll Manager

Technical Sales Manager (Internal) 
Swineshead, Lincolnshire | £29,000 | Full-Time, Permanent 
 
We’re supporting a long-established and fast-growing organisation within the print and packaging industry. With over 900 employees across multiple global sites, this business is known for its innovation, technical capability, and commitment to quality and sustainability. They now have an exciting opportunity for an Internal Technical Sales Manager to join their technical systems division. 
 
The Role 
This is an internal, office-based role working Monday to Friday, 9.00am–5.00pm (37.5 hours per week). It’s ideal for someone with an enquiring mind who enjoys problem-solving, technical products, and working directly with customers and suppliers. 
You will support customers on a wide range of products including label printers, labelling software, machinery, and warehouse management solutions. The position combines technical understanding, commercial awareness, and customer interaction, with responsibility for managing projects from initial enquiry through to installation and completion. 
 
Key Responsibilities
<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Act as a key point of contact for internal and external customers, offering technical guidance and commercial support
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Develop a strong understanding of the product range to identify solutions and address customer queries
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Create quotations, proposals, and technical documentation
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Communicate with customers to understand hardware and software requirements for projects typically valued between £1,000–£100,000
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Manage technical and commercial elements of projects through to final sign-off
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Maintain operator product manuals and technical literature
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Liaise with UK and overseas suppliers to ensure successful project delivery
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Create and identify new sales opportunities across the product range
</ul>
About You

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong communication skills (written and verbal)
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Professional telephone manner and confidence in customer interaction
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Self-motivated with a proactive, problem-solving mindset
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Resilient and able to manage multiple ongoing projects
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Technical, commercial, or process awareness
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Strong numerical ability and an interest in understanding how products work
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Experience with technical products, printing systems, machinery, or software is beneficial but not essential
</ul>
What’s on Offer

<ul>
	<li style="margin: 0.0cm 0.0cm 8.0pt;">£29,000 salary
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Full training on all products and systems
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Opportunity to develop strong technical and commercial skills
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Stable, supportive environment within a growing group
	<li style="margin: 0.0cm 0.0cm 8.0pt;">Long-term career potential within a well-established division
</ul>
If you enjoy solving problems, working with technology, and supporting customers with practical solutions, this internal technical sales role offers a great opportunity to build a specialist career within a respected industry leader.

Technical Sales Manager

Customer Service Representative 
Keighley | £28,000 | Full-Time, Permanent 
 

We are partnering with a long-established, industry-leading manufacturer within the print and packaging sector. With over 20 years of growth and a reputation for quality, innovation and low environmental impact, this organisation continues to expand across its UK and global sites. They are now looking to appoint an experienced Customer Service Representative to join their team at their Keighley site.

<h3>The Role</h3>

Working Monday to Friday, 9am–5pm, you will play a key part in supporting customers and ensuring the smooth processing of orders within a fast-paced print environment. This is a hands-on role where you will be responsible for managing your own accounts from first enquiry through to delivery.

<h3>Key Responsibilities</h3>

<ul>
	<li>
	Preparing and providing customer quotations
	
	<li>
	Processing customer orders accurately and efficiently
	
	<li>
	Handling incoming calls and queries from customers, suppliers, and internal teams
	
	<li>
	Coordinating with production, planning and other departments
	
	<li>
	General clerical and administrative duties to support smooth workflow
	
</ul>

<h3>About You</h3>

<ul>
	<li>
	Experience within a print environment is essential
	
	<li>
	Knowledge of self-adhesive labels is advantageous, but other print backgrounds are welcome
	
	<li>
	Strong organisational skills and the ability to manage multiple tasks
	
	<li>
	Confident working on your own initiative and taking ownership of your accounts
	
	<li>
	Clear and effective written and verbal communication
	
	<li>
	A team player who thrives in a fast-paced operational environment
	
</ul>

<h3>Benefits</h3>

<ul>
	<li>
	22 days holiday rising to 25 after 4 years’ service
	
	<li>
	Competitive salary and salary-sacrifice pension scheme
	
	<li>
	Death in Service (after 1 year)
	
	<li>
	Employee Assistance Programme
	
	<li>
	Refer a Friend scheme
	
	<li>
	Cycle to Work scheme
	
	<li>
	Health Cash Plan
	
	<li>
	Access to discounted gift cards
	
</ul>

If you are an experienced Customer Service professional from the print sector and are looking for a stable, well-established employer with strong values and long-term opportunities, we would love to hear from you.

Customer Service Representative

RELATED BLOGS

Make informed decisions

Get in touch with us today

Stay updated

Contact us

Send us a message

Our life science recruitment specialists all come from life science backgrounds.Whether you’re working on cutting-edge technologies or life-saving treatments, we can connect you to exceptional talent at all levels, from graduates up to directors, in pharmaceuticals, biotechnology and chemicals.We cover the whole of the UK, from large pharmaceutical companies to small biotechnology firms.

Bridging expertise, empowering innovation

Engineering Recruitment

Want to know how Jackson Hogg can transform your talent search?

CONTACT US

<div class="elementor-element elementor-element-ffd4100 elementor-widget elementor-widget-text-editor" data-id="ffd4100" data-element_type="widget" data-widget_type="text-editor.default"><div class="elementor-widget-container">Jackson Hogg was founded by Richard Hogg, a mechanical engineer, and we&rsquo;ve continued to excel in technical engineering assignments ever since.</div></div><div class="elementor-element elementor-element-53c3bca elementor-widget elementor-widget-text-editor" data-id="53c3bca" data-element_type="widget" data-widget_type="text-editor.default"><div class="elementor-widget-container">Our team is made up of discipline-led specialists split into electronics, electrical, mechanical, projects, senior appointments and graduates.We work with companies from start-ups to FTSE-listed multinationals, with specialisms in renewable energy and the wider STEM markets nationally from our bases in Newcastle and Teesside and covering permanent, temporary and interim roles.</div></div>

It All Started With Engineering

Looking for top talent in

Got an idea to share or want to reach out to us?

Engineering Jobs

WHITE PAPERS

View more

Engineering

OUR SECTOR

Looking for top talent in 

WHY WE STAND OUT

Jackson Hogg was founded in 2012 as a specialist engineering recruitment agency by former Mechanical Engineer, Richard Hogg. Since then we have grown to a team of over 100 people, helping our clients across the globe through our recruitment, HR outsourcing and training services. We focus on the Science recruitment, Technology recruitment, Engineering recruitment and Manufacturing recruitment across the UK and Internationally, and believe that everyone deserves to find their people.

A company that cares

OUR PARTNERS

View more jobs

They’ve been saying great things

Centred around care, trust and respect

At Jackson Hogg, your STEM expertise fuels innovation on a global scale. Connect pioneering talent with groundbreaking initiatives and witness the impact of your work in real-time. Want to make a difference in this industry, join our world-class team that’s passionate about transforming the world, one brilliant hire at a time.

Find your people

Stay Updated

Learn more

View more 

View more blogs

STEM Recruitment Specialists

 Centred around care, trust and respect

We are STEM specialists

Manufacturing

Science

Technology

OUR SERVICES

Manufacturing Recruitment

Our well-established network encompasses a diverse range of skilled professionals in the manufacturing industry. We utilize our connections and advanced recruitment tools to identify both active job seekers and passive candidates who excel in their fields. This access to a broad talent pool enables us to find the perfect match for your specific manufacturing needs.At Jackson Hogg, your success is our priority. We are committed to building lasting partnerships by consistently delivering top-tier manufacturing talent that drives your business forward. Our dedication to excellence and client satisfaction means we support you throughout the entire recruitment process and beyond, ensuring a seamless integration of new hires into your team and their continued success within your organization.

We Know Manufacturing

Manufacturing Jobs

Passionate about connecting great talent to the right companies?

WORK FOR US

Join us today

Sence Jobs

Read Case Study

Geopura were looking to supercharge their growth

Jackson Hogg Talent Partnerships are all about providing your business with the resource to manage recruitment, improve time to hire, improve quality of hire and reduce recruitment cost.Our clients come to us because their hiring managers are spending too much time and resource on recruitment. With a dedicated Talent Partner or team of Talent Partners alleviating your headache, we offer complete scalability, facilitate growth, and encompass all of the essential functions necessary for recruitment.Our Talent Partners can help with admin, direct hiring, onboarding and management of the recruitment process, suppliers and agencies, all while being data-driven to give you the management information you need to make informed decisions.

What is Talent Partnership?

Speak to us

Talent Partnerships

CASE STUDY

Jackson Hogg Talent Partnerships are all about providing your business with the resource to manage recruitment, improve time to hire, improve quality of hire and reduce recruitment cost.&nbsp;Our clients come to us because their HR and hiring managers are spending too much time and resource on recruitment. With a dedicated Talent Partner or team of Talent Partners alleviating your recruitment headache, our Talent Partnership offers complete scalability, facilitates growth, and encompasses all of the essential functions necessary for recruitment.Our Talent Partners can help with admin, direct hiring, onboarding and management of the recruitment process, suppliers and agencies, all while being data-driven to give you the management information you need to make informed decisions.

What is a Talent Partnership?

Read case study

Growing businesses face a number of people problems from finding the right people quickly, to finding the time to focus on optimising the recruitment process. In technical environments, internal recruiters have limited capacity to directly fill roles, leaving external agencies to fill a large proportion of the remainder. This can quickly get costly, and can cause recruitment costs to spiral.Jackson Hogg Talent Partnerships were created to take the pain out of growth, allowing your HR team to focus on doing what they do best, whilst providing a scalable, predictable, controllable service.

We’re built for growth

Growing businesses face a number of people problems from finding the right people quickly, to finding the time to focus on optimising the recruitment process. In technical environments, internal recruiters have limited capacity to directly fill roles, leaving external agencies to fill a large proportion of the remainder. This can quickly get costly, and can cause recruitment costs to spiral.Jackson Hogg Talent Partnerships were created to take the pain out of growth, allowing your HR team to focus on doing what they do best, whilst providing a scalable, predictable, controllable service.

Built for Growth

Jackson Hogg Talent Partners sit alongside your team, acting as or complimenting your existing Talent Acquisition team. As an integrated member of your team, our Talent Partners work closely with your hiring managers, on-site or remotely, fully adopting your brand identity, from email signatures to branded job ads.Our Talent Partners start with a full audit of your recruitment process, offering suggestions and making changes to improve the candidate experience and attract more candidates overall. Talent Partners also manage Jackson Hogg recruiters, 3rd-party agencies as well as filling roles themselves.

What does a talent partner do?

Jackson Hogg Talent Partners sit alongside your team, acting as or complimenting your existing Talent Acquisition team. As an integrated member of your team, our Talent Partners work closely with your hiring managers, on-site or remotely, fully adopting your brand identity, from email signatures to branded job ads.&nbsp;Our Talent Partners start with a full audit of your recruitment process, offering suggestions and making changes to improve the candidate experience and attract more candidates overall. Talent Partners also manage Jackson Hogg recruiters, 3rd-party agencies as well as filling roles themselves.

What does a Talent Partner do?

Grow with us

Hear what our clients think

Technology Recruitment

Over the years, we have built a vast and diverse network of top-tier tech professionals. Our connections span across various disciplines within the tech industry, from software development and data science to cybersecurity and IT management. This extensive talent pool enables us to quickly identify and reach out to highly skilled candidates who might not be actively seeking new opportunities but are perfect for your needs.

Find Your Next Tech Hire

Technology Jobs

Newcastle

Teesside

Leeds

Get in touch

Whitepapers

Insights

Jackson Hogg was founded in 2012 as a specialist engineering recruitment agency by former Mechanical Engineer, Richard Hogg. Since then we have grown to a team of over 100 people, helping our clients across the globe through our recruitment, HR outsourcing and training services.

We focus on the Science recruitment, Technology recruitment, Engineering recruitment and Manufacturing recruitment across the UK and Internationally, and believe that everyone deserves to find their people.

A people-led business built on care

About us

Because everyone deserves to love what they do.

Why?

What?

How?

About Us

Jobs posted by

Upload CV

Blogs

RELATED WHITEPAPERS

We specialise in the Science, Technology, Engineering and Manufacturing recruitment, so we understand what you do, and the possibilities that are out there for you.

Let us help you grow your career

Jackson Hogg has worked with companies all over the world to find the perfect people to steer them to success. This is because we care about finding the right fit for both clients and candidates.STEM talent acquisition fields are dynamic and imaginative and finding the right people can be challenging. However it’s a challenge we embrace. We’ve dedicated ourselves to the STEM fields for more than ten years, we have built a team of people with in-depth market knowledge and a drive to learn more.That’s how you can be sure that we’re looking for your ideal candidates in all the right places – plus a few unexpected ones.

Ideal candidates in the right places

For clients

We can take you to the next level

For candidates

Upload your CV

Ready to explore different opportunities and grow your career?

UPLOAD CV

Geopura is a growing, innovative clean energy technologies company who enable the production, transport, and use of zero-emissions fuels with innovative and commercially viable technology to decarbonise the global economy. Partnered with Siemens Energy, they are committed to 100% clean, renewable energy, independent from the grid, wherever and whenever it&rsquo;s needed

Geopura is a growing, innovative clean energy technologies company who enable the production, transport, and use of zero-emissions fuels with innovative and commercially viable technology to decarbonise the global economy. Partnered with Siemens Energy, they are committed to 100% clean, renewable energy, independent from the grid, wherever and whenever it’s needed

Clean energy without limits

The organisation’s headcount plan was ambitious, and required an expanded recruitment capability to deliver it, but with varying recruitment volumes throughout the year, they needed a flexible solution. Geopura considered hiring an in-house recruiter, but the niche roles they were looking to fill, combined with the variability of their recruitment requirements and limited employer brand within the market meant that this solution wasn’t viable. They also considered expanding their use of recruitment agencies, but the unpredictable costs involved in this were difficult to align with their plans.

Geopura’s growth was starting to accelerate in 2022, but that came with its own problems

By placing one of our talent partners on-site, on a scalable basis from two to five days per week, we were able to optimise their recruitment process from start to finish and help them achieve their headcount plan. Our process started with an in-depth audit of their recruitment process, from job specification writing and job board usage analysis to interview technique and offer management. From there we took detailed briefs of the roles on offer and got to work sourcing candidates directly through our talent partner, with assistance from our wider, specialist recruitment team, and created a preferred supplierlist for the specialist roles we didn’t have the expertise to fill ourselves.

To assist Geopura in their ambitious growth journey, Jackson Hogg proposed our flagship Talent Partnership service.

Our talent partner assisted in creating an apprenticeship scheme to foster new talent, and by optimising the recruitment process and controlling all activities centrally, time to offer was reduced by 22%. This all allowed Geopurato achieve their headcount plans, continue their growth journey and focus on their innovative technologies rather than recruitment. Due to the success of their first 12 months, Geoupura extended their contract by a further 12 months.

Our talent partner assisted in creating an apprenticeship scheme to foster new talent, and by optimising the recruitment process and controlling all activities centrally, time to offer was reduced by 22%. This all allowed Geopura to achieve their headcount plans, continue their growth journey and focus on their innovative technologies rather than recruitment. Due to the success of their first 12 months, Geopura extended their contract by a further 12 months.

Through 12 months of Talent Partnership, Geopura hired 25 people, 92% of whom were sourced either directly or by Jackson Hogg. 

Solutions

Jackson Hogg has worked with companies all over the world to find the perfect people to steer them to success. This is because we care about finding the right fit for both clients and candidates. STEM fields are dynamic and imaginative and finding the right people can be challenging - but that's a challenge we embrace. We&rsquo;ve dedicated ourselves to the STEM fields for more than ten years and built a team of people with in-depth market knowledge and a drive to learn more. That&rsquo;s how you can be sure that we&rsquo;re looking for your ideal candidates in all the right places &ndash; plus a few unexpected ones.

We're passionate about people

The best talent is in huge demand. So we work with you to ensure that you stand out. We also understand that recruitment is only the first step. We offer a range of people services - from HR outsourcing to training and talent marketing - to make sure your company is set up to allow your people to thrive.Looking for temporary project support, growing to meet your ambitions, or seeking a new visionary executive to take you to the next level?

The best talent is in huge demand. So we work with you to ensure that you stand out. We also understand that recruitment is only the first step. We offer a range of people services - from HR outsourcing to training to make sure your company is set up to allow your people to thrive. Looking for temporary project support, growing to meet your ambitions, or seeking a new visionary executive to take you to the next level? Let's talk.

Executive Search

<div class="elementor-element elementor-element-2892296 h6 elementor-widget elementor-widget-text-editor" data-id="2892296" data-element_type="widget" data-widget_type="text-editor.default"><div class="elementor-widget-container">At Jackson Hogg, we love all things STEM. That&rsquo;s Science, Technology, Engineering and Manufacturing to us. Executive search is no different. We have partnered with STEM businesses at every stage of their journey, from pre-revenue start-ups to established multi-nationals, introducing them to the right people to help them achieve their goals and take the next step.</div></div><div class="elementor-element elementor-element-89a43e9 elementor-widget elementor-widget-text-editor" data-id="89a43e9" data-element_type="widget" data-widget_type="text-editor.default"><div class="elementor-widget-container">That&rsquo;s not to say that we don&rsquo;t occasionally work on executive roles outside of STEM, but STEM is where we at our strongest, where we have an unrivalled track record, and provides a key point of difference to our competitors.</div></div>

We Are STEM Specialists

This is a 404 error, which means you've clicked on a bad link or entered an invalid URL.

HR Outsourcing from Jackson Hogg

We understand the need for SMEs to be dynamic and take an approach to people which harnesses the great things SMEs have to offer. That&rsquo;s why our team has been crafted with a mix of skills and experience to work with the changing needs of your business and support you with transactional activities, operational projects, or strategic planning.

Flexible HR Support Underpinned by Care, Trust and Respect

Industrial Recruitment

Our team of discipline experts provide high-quality, innovative recruitment and people services solutions to organisations seeking to find, train and retain exceptional talent across all functions. We offer a personal and tailored service that ensures you secure the right people for your organisation for the long term.

We're Here For Manufacturing Clients Across The UK

Job search

Job Search

Jackson Hogg is an outsourced talent services business who has a vision of being the global leader in talent services. We drive to constantly exceed expectations and we’re on an exciting journey that we would love for you to join.

Jackson Hogg is an outsourced talent services business who has a vision of being the global leader in talent services. We drive to constantly exceed expectations and we&rsquo;re on an exciting journey that we would love for you to join.

We are committed to being an inclusive environment for all. We ensure that both applicants and our colleagues receive unbiased treatment without discrimination. We are also committed to doing what we can to limit our impact on the environment and ensure our way of working reflects this. Plus positive impact on the community around us by working with local charities.

Committed to do what is right

Join our team

OUR VALUES

What’s in it for you?

Life at Jackson Hogg

We are committed to being an inclusive environment for all. We ensure that both applicants and our colleagues receive unbiased treatment without discrimination. &nbsp; We are also committed to doing what we can to limit our impact on the environment and ensure our way of working reflects this. We also aim to make a positive impact on the community around us by working with local charities throughout the year.

Committed to doing what is right

Passionate about connecting top talent to leading companies?

Meet the team

Recruitment Solutions

We’ve spent more than a decade working exclusively in the Science, Technology, Engineering and Manufacturing sectors – so we’ve got the in-depth knowledge and market experience to identify the talent that’s right for you.We care about finding the best matches for our clients, and our candidates. So we’ll take the time to learn about your culture and ambitions. Then we’ll scour our networks for the great candidates that fit.

We&rsquo;ve spent more than a decade working exclusively in the Science, Technology, Engineering and Manufacturing sectors &ndash; so we&rsquo;ve got the in-depth knowledge and market experience to identify the talent that&rsquo;s right for you. We care about finding the best matches for our clients, and our candidates. So we&rsquo;ll take the time to learn about your culture and ambitions. This deep understanding enables us to identify candidates who will thrive in your environment and contribute meaningfully to your team.Our extensive networks are filled with talented professionals eager to take the next step in their careers. We leverage these connections to find candidates who not only meet your technical requirements but also fit seamlessly into your organisational culture. By doing so, we ensure that every placement is a long-term success for both you and the candidate.

Our personalised approach to recruitment

Science Recruitment

What sets us apart is our deep industry knowledge and specialized approach. Our team consists of professionals with backgrounds in various scientific disciplines, providing them with the insight needed to understand both the technical requirements of the positions we fill and the aspirations of the candidates we serve. We leverage a vast network of industry connections and a robust database of skilled professionals to deliver customized recruitment solutions that meet the specific needs of our clients. Whether you are a cutting-edge startup looking to build a pioneering team or an established company seeking to expand your research capabilities, we have the resources and expertise to help you achieve your goals.

We're Scientists Recruiting Scientists

We can find candidates that share your ambitions and fit your culture, whether you’re recruiting at entry level or looking for board-level or executive talent.And we can help you build your relationship with your team, through HR advice, training and professional advice. We’re “deliberately specialist” – which means we know how your sector works, and what you need to excel.

Time to elevate your business

Sectors

We can find candidates that share your ambitions and fit your culture, whether you&rsquo;re recruiting at entry level or looking for board-level or executive talent. And we can help you build your relationship with your team, through HR advice, training and professional advice. Our consultants are specialists, not generalists, which means we know how your sector works, and what you need to excel.

Part-Time Janitor

Apply

Related jobs

Part-Time Janitor

FLT Driver

Paint Operative

Metal Dresser